West Sussex · England

Bath re-enamelling & resurfacing in Adversane, West Sussex

Bath re-enamelling across Adversane and nearby, typically in one visit.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Adversane

About our bath re-enamelling in Adversane

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix wear marks under the taps and a coloured bath you want in white, on basins & shower trays, Victorian roll-tops and pressed steel baths.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Where
Adversane (RH14)
Region
West Sussex
Cover
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Common problems we fix in Adversane

A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

Get in touch if you’ve noticed any of these:

  • Stains that won’t shift
  • Enamel that is lost its shine and feels rough
  • Several chips and rust patches
  • An old resurfacing that’s failing

Before you book anyone

  • Who will actually do the work
  • What the guarantee covers, and for how long
  • Whether the price is fixed and includes VAT
  • How the room is protected while they work

Our hiring checklist

Landlords, agents and businesses in Adversane

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

How it works

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

How to prepare

  • Point us to the nearest place to park
  • Clear toiletries, mats and anything else from around the area
  • Ensure the area is dry

How to get a price

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Send pictures for a quote

Read more

How to care for the repair

How the surface is treated afterwards matters:

  • Dry the bath after use to stop limescale
  • Have chips seen to early
  • Do not leave bottles, razors or sponges standing on the surface
  • Respect the curing time we give you

A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

When a repair is not the answer

We’d rather lose a job than do one that won’t last, so these are the limits:

  • Leaks from fittings rather than the bath
  • An acrylic bath that flexes badly underfoot
  • Anything hidden under an old coating, until we remove it

Send us photos and we’ll tell you honestly before booking.

Materials we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

Prices and what affects them

Prices start from £350. We give every job a fixed price from pictures. This is what makes a difference:

  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • The material
  • How easy the damage is to reach

The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.

How to get a fixed quote

Good photos mean an accurate price. Here’s what we find most useful:

  • A close-up of the damage, in focus
  • The material, if you know it
  • A wider photo showing the whole bath
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

Our work in Adversane

Adversane is about 8 miles south-west of Horsham, in West Sussex. Across the RH14 area, we carry out the work at your property. Our technicians cover all 371 towns and villages across West Sussex. We work right across the region, from Adversane to London (about 38 miles away).

Our repair technicians cover all of the RH14 postcode area and the streets around it. We regularly work on streets such as Stane Street, Adversane Lane and Lordings Road and the roads around them. Nearby, we also work in North Heath (1 mile south), Gay Street (2 miles south), Codmore Hill (2 miles south-west), Broomershill (2 miles south) and Nutbourne (3 miles south). Further out, we also cover Crawley (15 miles north-east), Horsham (8 miles north-east), Worthing (12 miles south), Burgess Hill (15 miles east), Littlehampton (13 miles south) and Shoreham-by-Sea (14 miles south-east).

Near you in Adversane

Locally, our jobs take us to homes close to The Weald School and the streets around them. The closest station to Adversane is Billingshurst station, about 1.5 miles north-east of the centre. Not far away are The Mens.

Map of Adversane © OpenStreetMap contributors

Adversane questions

Do you cover the entire of West Sussex?

We work UK-wide. Our prices are the same everywhere.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside if you’d like.

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

How long does re-enamelling last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Do you cover Adversane?

Yes. We work across the UK and come to Adversane. Send pictures and we will quote, or call 0345 017 0787.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.