West Sussex · England
Bath re-enamelling & resurfacing in Codmore Hill, West Sussex
Local bath re-enamelling for Codmore Hill: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that don’t clean off
Bath re-enamelling in Codmore Hill, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s chips and rust in more than one place and a dull, rough surface that won’t come clean, we can help.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Codmore Hill (RH20)
- Area hub
- West Sussex
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £350. There is no charge for travel to Codmore Hill. The price comes down to:
- Doing more than one item at once
- The material
- Whether old repairs or coatings need taking off
- How much damage there is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Getting a price from pictures
Phone pictures are fine, there is no need for anything special. Make sure they show:
- Natural light rather than flash
- Something in shot to show the size
- The material, if you know it
- A wider photo showing the entire bath
If you’re in Codmore Hill and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Aftercare tips
To keep it looking its best:
- Don’t leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs straight away
- Don’t leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Questions from Codmore Hill
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Are there extra charges for Codmore Hill?
We don’t add a call-out fee. Your fixed quote includes everything.
How do I get a price for bath re-enamelling in Codmore Hill?
Prices start from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your RH20 postcode.
Landlord and trade work in Codmore Hill
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What we do, step by step
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Make sure the area is dry
- Keep children and pets away from the room on the day
- Let us know about parking or access
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Advice
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why book with us
- Generally one visit, start to finish
- Colour mixed on the day to match
- One price list for the entire UK
- We come to you, anywhere in the UK
See our full price list and resurfacing vs replacement cost guide.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
When to call us in Codmore Hill
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
If you can see any of these, send us a photo:
- Stains that will not shift
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
Before booking anyone
- How to care for the finish
- What prep work is covered
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
Also near Codmore Hill
More services for Codmore Hill
Covering Codmore Hill
Codmore Hill is about 10 miles south-west of Horsham, in West Sussex. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Codmore Hill is one of 371 towns and villages in West Sussex where we work. Our jobs stretch from Codmore Hill to London (about 40 miles away).
Postcode districts we cover here: RH20. We regularly work on streets such as Masons Way, Hill Farm Lane and Stane Street. Nearby, we also work in Broomershill (1 mile south-east), North Heath (1 mile north-east), Nutbourne (1 mile south-east), Marehill (1 mile south-east) and Gay Street (2 miles east). Further out, we also cover Horsham (10 miles north-east), Worthing (11 miles south-east), Bognor Regis (15 miles south-west), Chichester (15 miles south-west), Littlehampton (11 miles south) and Shoreham-by-Sea (14 miles south-east).
Around Codmore Hill
Our clients here include homes close to St Mary's Church of England Primary School and The Parish Church of St Mary. For rail, the closest station is Pulborough station, roughly 1.2 miles south-west of the centre. A little further out are Coates Castle (4.2 miles west). Open spaces near Codmore Hill include The Mens.
About our accreditations · Every repair comes with a one-year guarantee.
