Sefton · England
Bath re-enamelling & resurfacing in Aintree, Sefton
Our technicians come to Aintree for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Bath re-enamelling in Aintree without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for thin, worn enamel in places and a bath in a colour that no longer suits, in basins & shower trays, cast iron baths and Victorian roll-tops.
Whatever the size of the job, it’s backed by a one-year guarantee in Aintree and across Sefton.
- Area
- Aintree (L10, L9, L30)
- County
- Sefton
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Other services in Aintree
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow the best part of a day. Before leaving, we tell you how long to leave it and how to care for it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Ensure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll say immediately if a repair is the right fix.
Read more
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Aintree. The price depends on:
- Where the damage is and how we get to it
- How much damage there is
- Any earlier repairs that need removing first
- The material and finish
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- One picture of the entire bath
- Whether it’s been repaired or coated before
- Where you are, by postcode
- Natural light rather than flash
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Covering Aintree
Aintree is about 2 miles south of Maghull, in Sefton. Clients in Aintree get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We work in 36 places across Sefton, from the larger towns to small villages.
Jobs in L10, L9 and L30 work the same way as everywhere else we cover. Streets in the area include Harrow Drive, Lowther Avenue and Haileybury Avenue, all of which we cover. Neighbouring places we cover include Old Roan (1 mile west), Fazakerley (1 mile south), Waddicar (1 mile east), Melling (1 mile north-east) and Netherton (1 mile north-west). Within a short drive, we also cover Southport (11 miles north), Formby (7 miles north-west), Litherland (3 miles west), Seaforth (3 miles west), Lydiate (3 miles north) and Freshfield (8 miles north-west).
Near you in Aintree
Typical jobs here are in homes near Saint Giles, Bootle High School and Warbreck Park. Other local landmarks include The Valentine pub (less than half a mile east) and Holy Rosary Catholic Primary School (within half a mile north). For rail, the closest station is Old Roan station, roughly 0.6 miles north-west. Well-known places in the area include New Strand Shopping Centre (3.1 miles south-west) and Fazakerley Hospital (1 mile south). Open spaces near Aintree include Crosby Marina.
- Local facilities include Fazakerley (1.3 miles south-east)
Questions from Aintree
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can a failed resurfacing be redone?
Generally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Are there extra charges for Aintree?
We do not add a call-out fee. Your fixed quote includes everything.
Do you cover the entire of Sefton?
Across the UK, and that includes Aintree. Our prices are the same everywhere.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
Send us photos and we’ll tell you honestly before you book.
What we work on
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Aftercare tips
Simple care helps the repair last. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Have chips seen to early
- Respect the curing time we give you
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Repair or replace in Aintree?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- Colour mixed on the day to match
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
