Shropshire · England
Bath re-enamelling & resurfacing in Albrighton, Shropshire
Bath re-enamelling for Albrighton, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Albrighton and the surrounding area
Albrighton is about 7 miles north-west of Wolverhampton, in Shropshire. Jobs in Albrighton are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Albrighton is one of 433 places in Shropshire we cover. Our nearest city page is Birmingham, about 20 miles away.
Our visits in WV7 work the same way as everywhere else we cover. We regularly work on streets such as High Street, Station Road and Church Road and the roads around them. Neighbouring places we cover include Donington (1 mile north-west), Boningale (1 mile south), Shackerley (1 mile north), Kingswood (2 miles south-east) and Tong (2 miles north). Within a short drive, we also cover Madeley (7 miles west), Bridgnorth (9 miles south-west), Shifnal (4 miles north-west), Broseley (9 miles west), Much Wenlock (12 miles west) and Highley (13 miles south).
Local landmarks in Albrighton
Typical jobs here are in homes near Church of St Mary Magdalene, Shrewsbury Arms and Albrighton Primary School & Nursery and the streets around them. For rail, the closest station is Albrighton station, roughly 0.5 miles east of the centre. Further afield, we also cover the area around RAF Hospital Cosford (1.2 miles north) and Tong Castle (2.2 miles north-west).
How we handle bath re-enamelling in Albrighton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with thin, worn enamel in places and an outdated colour you’d like to change, we can help, whatever the material.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Albrighton (WV7)
- Region
- Shropshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Albrighton
Also in Albrighton
Keeping it looking good
So the finish stays in good condition for years:
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Common questions in Albrighton
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Shropshire.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
How long does re-enamelling take?
Generally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take the best part of a day, and you’re welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Getting a price
To get a price, send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Related advice
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- What kind of damage it is
- How many areas need work
- How hard the colour is to match
- Whether we combine several jobs
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Natural light rather than flash
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A wider photo showing the whole bath
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Repair or replace: which is better?
A replacement often means several trades over several days. Re-enamelling is one technician, usually one day, with the bath back in use the day after. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
What you get with us
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- No need to remove anything
See our full price list and bath cost comparison.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
When a repair isn’t the answer
It helps to know what we cannot do:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly.
Materials we work on in Albrighton
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
If you manage property in Albrighton, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
