Shropshire · England
Bath Re-enamelling for Boningale homes
Local bath re-enamelling for Boningale: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A peeling or bubbling previous coating
Bath re-enamelling in Boningale without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We regularly repair pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are worn patches where water runs and sits and brown or grey marks that don’t clean off.
Big or small, it’s backed by a one-year guarantee in Boningale and across Shropshire.
- Where
- Boningale (WV7)
- County
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Boningale. The price depends on:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- The type of damage
- How many areas need work
Our prices are the same across the UK, so there’s no premium for Boningale. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
You can generally get a fixed price without us visiting. To help us price it:
- A clear, close picture of the problem area
- Details of any past repairs
- One picture of the entire bath
- Natural light rather than flash
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
How it works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the following day.
Preparing for the visit
- Clear the area around the damage
- Let us know which floor the room is on
- Point us to the nearest place to park
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Nearby places to Boningale
Other services in Boningale
Boningale and the surrounding area
Boningale is about 6 miles west of Wolverhampton, in Shropshire. Whether you’re in the middle of Boningale or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Boningale is one of 433 places in Shropshire where we work. We work right across the region, from Boningale to Birmingham (19 miles away).
Our visits in WV7 work the same way as everywhere else we cover. Streets in the area include Holyhead Road, Woodhouse Lane and Church Lane. Other places close to Boningale include Albrighton (1 mile north), Kingswood (1 mile east), Donington (2 miles north), Shackerley (2 miles north) and Codsall Wood (2 miles north-east). Within a short drive, we also cover Madeley (8 miles west), Bridgnorth (9 miles south-west), Shifnal (5 miles north-west), Broseley (9 miles west), Much Wenlock (12 miles west) and Highley (13 miles south).
Landmarks near Boningale
Our clients here include homes close to Church of St Chad, Albrighton Primary School & Nursery and Donington and Albrighton. The closest station to Boningale is Albrighton station, about 1.1 miles north. Well-known places in the area include RAF Hospital Cosford (2.2 miles north) and Tong Castle (3.2 miles north-west).
Common problems we fix in Boningale
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
These are the problems we’re asked about most:
- A coloured bath you want in white
- Chips and rust in more than one place
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
Comparing quotes
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- Whether a trained technician does the job
- If travel is included in the price
Boningale: your questions answered
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Can a failed resurfacing be redone?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the next day. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- One price list for the whole UK
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
- No need to remove anything
Take a look at our pricing or guide to resurfacing and replacement costs.
Keeping it looking good
To keep it looking its best:
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Repair dripping taps early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
