Staffordshire · England
Bath re-enamelling & resurfacing in Codsall Wood, Staffordshire
Full bath re-enamelling and resurfacing in Codsall Wood, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
Bath re-enamelling in Codsall Wood without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We work on acrylic baths, cast iron baths and Victorian roll-tops, and the jobs we see most are an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean.
You get a one-year guarantee, the same in Codsall Wood as everywhere else we work.
- Where
- Codsall Wood (WV8)
- Region
- Staffordshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Codsall Wood
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- How hard the colour is to match
- How easy the damage is to reach
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Natural light rather than flash
- What it’s made of, if you know
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Repairing versus replacing in Codsall Wood
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Codsall Wood customers choose us
- One price list for the entire UK
- Generally one visit, start to finish
- Everything repaired in place
- Every repair guaranteed for a year
See our prices page or resurfacing vs replacement cost guide.
Work for landlords and builders
If you manage property in Codsall Wood, we’ll quote for several properties at once. Send photos for each one and we will price them together.
We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Towns and villages near Codsall Wood
More services for Codsall Wood
Codsall Wood and nearby
Codsall Wood is about 6 miles north-west of Wolverhampton, in Staffordshire. From the centre of Codsall Wood to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Codsall Wood is one of 512 towns and villages in Staffordshire where we work. You can also see our page for Birmingham, about 18 miles away.
All of WV8 is within our area, from the main roads to the quietest streets. Whether you live on Whitehouse Lane, Wood Road and Church Lane or anywhere nearby, a technician can come to you. Close by, we cover Kingswood (1 mile south-west), Oaken (2 miles south), Shackerley (2 miles west), Albrighton (2 miles west) and Boningale (2 miles south-west). Within a short drive, we also cover Stafford (12 miles north), Cannock (10 miles north-east), Rugeley (14 miles north-east), Burntwood (13 miles east), Hednesford (11 miles north-east) and Wombourne (8 miles south).
Landmarks near Codsall Wood
Around Codsall Wood, we work in homes near The Cross Guns pub, St Peter and Codsall Community High School. For rail, the closest station is Codsall station, roughly 1.5 miles south-east of the centre. Nearby you’ll also find RAF Hospital Cosford (2.6 miles west) and Tong Castle (3.5 miles north-west).
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Looking after it afterwards
Once the work has cured, treat it gently:
- Do not leave a chip unrepaired
- Never use suction bath mats
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for most of the day. Before leaving, we tell you when it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
- Tell us about any previous repairs or coatings
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
What we can’t put right
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
What we’re called out for in Codsall Wood
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Look out for these signs:
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- An outdated colour you’d like to change
Questions to ask before you book
- How to care for the finish
- How the colour is matched
- How changes to the job are handled
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
