Gloucestershire · England
Bath Re-enamelling for Allaston homes
Our technicians come to Allaston for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Repairing versus replacing in Allaston
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- One-year guarantee on every repair
- A fixed quote before you book
See our full price list or bath cost comparison.
Bath re-enamelling in Allaston, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Typical jobs include wear marks under the taps and a roll-top that’s seen better days, in pressed steel baths, basins & shower trays and cast iron baths.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Area
- Allaston (GL15)
- Region
- Gloucestershire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Signs you need bath re-enamelling in Allaston
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Send us a picture if you notice any of these:
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
- Wear marks under the taps
Comparing quotes
- Aftercare advice
- How long it needs to cure
- What happens if they find more damage
- Whether cleaning and preparation are in the price
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Towns and villages near Allaston
More services for Allaston
Allaston: your questions answered
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Keeping it looking good
Aftercare is simple:
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Avoid suction-cup mats
- Respect the curing time we give you
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How the visit works
Arrival times are agreed in advance. Once we’re there, the work takes the best part of a day for most jobs. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Ensure the room can be ventilated
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
Getting a price
For a price in Allaston, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- How hard the colour is to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Phone pictures are fine, there is no need for anything special. Make sure they show:
- A clear, close picture of the problem area
- Something in shot to show the size
- Details of any past repairs
- Daylight if possible, and no flash reflection
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Where we work around Allaston
Allaston is about 8 miles north of Thornbury, in Gloucestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 470 places across Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 58 miles away.
Every address in GL15 is covered, from the main roads to the quietest streets. Streets in the area include Hams Road, Swan Road and Bream Road, all of which we cover. Neighbouring places we cover include Lydney (1 mile south-east), Aylburton (2 miles south-west), Brockhollands (2 miles north-west), Oldcroft (2 miles north-east) and Pillowell (2 miles north). We also work in nearby towns such as Gloucester (15 miles north-east), Stroud (13 miles east), Quedgeley (12 miles north-east), Tredworth (15 miles north-east), Kingsway Village (13 miles north-east) and Cam (7 miles east).
Near you in Allaston
Around Allaston, we work in homes near Holy Trinity, The Dean Academy and Lydney Church of England Community School (VC) and the streets around them. Allaston’s nearest station is Lydney station, roughly 1.1 miles south of the centre. Other landmarks nearby include Lydney Park Museum (1.2 miles south-west) and Little Camp Hill (1.3 miles south-west).
About our accreditations · Every repair comes with a one-year guarantee.
