Gloucestershire · England
Bath Re-enamelling for Aylburton homes
Our repair technicians come to Aylburton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Enamel that’s lost its shine and feels rough
Honest limits
Some jobs aren’t right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Bath re-enamelling in Aylburton without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We are frequently asked to fix chips and rust in more than one place and stains that won’t shift, on Victorian roll-tops, basins & shower trays and acrylic baths.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Area
- Aylburton (GL15)
- Region
- Gloucestershire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Aylburton
Aylburton is about 7 miles north of Thornbury, in Gloucestershire. We visit homes and businesses in Aylburton and the surrounding area, so nothing has to leave your home. Aylburton is one of 470 towns and villages in Gloucestershire we cover. You can also see our page for Birmingham, about 59 miles away.
Jobs in GL15 work the same way as everywhere else we cover. We regularly work on streets such as Church Road, High Street and Orchard Close. If you are just outside Aylburton, we cover Alvington (1 mile south-west), Allaston (2 miles north-east), Lydney (2 miles north-east), Woolaston (2 miles south-west) and Brockhollands (2 miles north). Further out, we also cover Stroud (14 miles east), Quedgeley (14 miles north-east), Kingsway Village (14 miles north-east), Cam (8 miles east), Stonehouse (12 miles east) and Dursley (9 miles east).
Landmarks near Aylburton
Around Aylburton, we work in homes near Cross Inn, Church of St Mary and Aylburton Church of England Primary School, among other places. Aylburton’s nearest station is Lydney station, roughly 1.1 miles east. Further afield, we also cover the area around Lydney Park Museum (under half a mile east) and Little Camp Hill (within half a mile north). Not far away are Ridley Bottom.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs right away
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
The process
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Get a quote
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
What else we do in Aylburton
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- Whether we combine several jobs
- The type of damage
- How much damage there is
- Access to the area
Our prices are the same across the UK, with no extra for Aylburton. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
You can normally get a fixed quote without us visiting. To make it quick:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
FAQs for Aylburton
Do you charge for travel?
There’s no separate call-out charge. The fixed price covers the visit and the work.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
What happens once I’ve sent photos?
We come back with a fixed quote. You are under no obligation.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Repairing versus replacing in Aylburton
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- One price list for the entire UK
- Rooms protected and left tidy
See our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
