Staffordshire · England

Bath Re-enamelling in Hunts Green

Fixed-price bath re-enamelling in Hunts Green and the surrounding area, normally in one visit and guaranteed for a year.

  • Resurfacing from £350
  • Stains that will not shift
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Hunts Green

FAQs for Hunts Green

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before.

Is repairing better than replacing?

Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

What happens after I send pictures?

We review the photos and send a fixed quote.

Do you cover Hunts Green?

Yes, we do. We send a technician to Hunts Green for every job, and the price is the same as everywhere else.

Can pets and children be at home?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Can a failed resurfacing be redone?

Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.

How much does bath re-enamelling cost in Hunts Green?

Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Bath re-enamelling in Hunts Green without replacing anything

The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, and can be used again the following day. Whether it’s brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, we can help.

All our work is covered by our one-year guarantee.

Technician in a mask working on a freestanding roll-top bath
Where
Hunts Green (B78)
County
Staffordshire
Cover
One year on every repair
Price
From £350. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

What we cannot put right

Some jobs are not right for a repair, including:

  • A poorly supported acrylic bath, until it’s firmed up
  • Leaks from fittings rather than the bath
  • A bath split right through the body

Send us pictures and we’ll tell you honestly.

What we work on

  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays

How the visit works

Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Let the surface dry out before the visit
  • Move bottles, mats and clutter away from the area
  • Open a window if you can

Get a quote

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send pictures for a quote

Read more

Landlords, agents and businesses in Hunts Green

We regularly work with letting and managing agents. Send the address, pictures and access details.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Why repair rather than replace?

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why Hunts Green customers choose us

  • Colours mixed by hand to suit your surface
  • Same prices wherever you are
  • Typically one visit, start to finish
  • We leave the room as we found it

See our full price list or resurfacing vs replacement cost guide.

Looking after it afterwards

Good habits make a big difference to how long a repair lasts:

  • Keep toiletries on a shelf rather than in the bath
  • A quick wipe after use keeps limescale away
  • Do not use the bath until it has fully cured
  • Stick to gentle, non-abrasive cleaners

Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.

Don’t try to scrub a worn bath back to shine. It removes more of the surface.

Hunts Green and the surrounding area

Hunts Green is about 4 miles east of Royal Sutton Coldfield, in Staffordshire. Across the B78 area, we come to you. Hunts Green is one of 512 towns and villages in Staffordshire where we work. We work right across the region, from Hunts Green to Birmingham (about 10 miles away).

Our repair technicians cover all of B78 and the streets around it. Nearby, we also work in Middleton (1 mile north-west), Stoke End (1 mile west), Allen End (1 mile west), Bodymoor Heath (1 mile south-east) and Grove End (2 miles south-west). Larger places within reach include Tamworth (4 miles north-east), Cannock (15 miles north-west), Lichfield (8 miles north-west), Rugeley (15 miles north-west), Burntwood (11 miles north-west) and Hednesford (15 miles north-west).

Landmarks near Hunts Green

Typical jobs here are in homes near Church of St John the Baptist, Kingsbury Water Park and Kingsbury School. The nearest railway station is Wilnecote station, about 3.4 miles north-east. A little further out are Kingsbury Hall (2 miles east) and Sir Robert Peel Community Hospital (3.3 miles north). Open spaces near Hunts Green include Middleton Lakes RSPB reserve.

Map of Hunts Green © OpenStreetMap contributors

Materials and what they mean for the repair

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.

Signs you need bath re-enamelling in Hunts Green

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

The most common problems we’re called about are:

  • Enamel that’s lost its shine and feels rough
  • Wear marks under the taps
  • A period or roll-top bath worth keeping
  • Chips and rust in more than one place

Before booking anyone

  • What aftercare is recommended
  • How the colour is matched
  • What prep work is covered
  • Whether the price is fixed and includes VAT

Choosing a repair company

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.