County Durham · England
Bath Re-enamelling for Allensford homes
Fixed-price bath re-enamelling in Allensford and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
Allensford and nearby
Allensford is about 2 miles west of Consett, in County Durham. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Allensford is one of 329 places in County Durham we cover. We work right across the region, from Allensford to Newcastle upon Tyne (about 14 miles away).
Jobs in DH8 work the same way as everywhere else we cover. We also cover the places around Allensford: The Grove (1 mile east), Castleside (1 mile south), Shotley Grove (1 mile north-east), Bridgehill (1 mile north-east) and Healeyfield (1 mile south). Larger places within reach include Durham (13 miles east), Spennymoor (15 miles south-east), Chester-le-Street (12 miles east), Stanley (8 miles east), Crook (11 miles south-east) and Birtley (13 miles east).
What’s near Allensford
In Allensford, that means homes near Consett Academy, St. John's Church and Moorside Primary School, among other places. Well-known places in the area include Shotley Bridge Hospital (2.2 miles north-east). The countryside around Allensford includes Skaylock Hill.
Bath re-enamelling in Allensford, done in place
We do not move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the next day. We work on acrylic baths, basins & shower trays and cast iron baths, and people most often call us about a dull, rough surface that won’t come clean and an outdated colour you’d like to change.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Allensford (DH8)
- County
- County Durham
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before booking. We take into account:
- What the surface is made of
- Previous DIY repairs that have to come out
- What kind of damage it is
- How many areas need work
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- One picture of the entire bath
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Places near Allensford
What else we do in Allensford
Repair or replace in Allensford?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Allensford
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
- We leave the room as we found it
Read our full price list and resurfacing vs replacement cost guide.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Common questions in Allensford
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you repair something that’s been repaired before?
Usually, yes. We remove the old repair before doing a new one.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
When to call us in Allensford
Hard water speeds up the wear, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- Stains that won’t shift
- An old resurfacing that’s failing
What to look for in a quote
- What protection goes down before work starts
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
Landlord and trade work in Allensford
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for most of the day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Do not let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
- Have chips seen to early
- Repair dripping taps early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
