Medway · England
Bath Re-enamelling for Allhallows-on-Sea homes
Full bath re-enamelling and resurfacing in Allhallows-on-Sea, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that won’t shift

When to call us in Allhallows-on-Sea
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we’re called about are:
- Several chips and rust patches
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Stains that will not shift
What your quote should include
- What the guarantee covers, and for how long
- How your room will be protected
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the photos show
About our bath re-enamelling in Allhallows-on-Sea
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the next day. We work on Victorian roll-tops, acrylic baths and basins & shower trays, and people most often call us about wear marks under the taps and a coloured bath you want in white.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Allhallows-on-Sea (ME3)
- County
- Medway
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026

Covering Allhallows-on-Sea
Allhallows-on-Sea is about 4 miles south-east of Canvey Island, in Medway. Whether you are in the middle of Allhallows-on-Sea or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Allhallows-on-Sea is one of 68 places in Medway we cover. You can also see our page for London, about 32 miles away.
Our repair technicians cover all of ME3 and the streets around it. You will find streets such as Avery Way, Queensway and Park End View. If you are just outside Allhallows-on-Sea, we cover Allhallows (1 mile south-west), Lower Stoke (1 mile south-west), Middle Stoke (2 miles south-west), Stoke (2 miles south-west) and St Mary Hoo (3 miles west). Larger places within reach include Gillingham (8 miles south-west), Chatham (10 miles south-west), Rochester (9 miles south-west), Rainham (8 miles south), Strood (9 miles south-west) and Luton (9 miles south-west).
What’s near Allhallows-on-Sea
Typical jobs here are in homes near Allhallows Primary Academy, Rose And Crown Public House and Church of All Saints and the streets around them. Allhallows-on-Sea’s nearest station is Chalkwell station, roughly 4.6 miles north of the centre. A little further out are Chartwell Private Hospital (5.2 miles north) and Bay Museum (3.8 miles north-west). Green spaces nearby include Two Tree Island.
Keeping it looking good
Aftercare is simple:
- Use washing-up liquid and a soft cloth
- Store bottles off the bath
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Landlord and trade work in Allhallows-on-Sea
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Landlords, letting agents and housing providers in Allhallows-on-Sea use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Also near Allhallows-on-Sea
Also in Allhallows-on-Sea
What bath re-enamelling costs
Prices start from £350. You will not pay by the hour. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How many areas need work
- Unusual colours or finishes
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what we find most useful:
- The postcode, so we can plan the visit
- A photo taken from further back
- What it’s made of, if you know
- A coin beside the damage so we can judge size
If you are in Allhallows-on-Sea and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
The process
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to the best part of a day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Make sure the room can be ventilated
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
Common questions in Allhallows-on-Sea
Do you work in Allhallows-on-Sea?
Yes. We cover the entire UK and travel to Allhallows-on-Sea and the rest of Medway. Send pictures and we will quote, or call 0345 017 0787.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
How much does bath re-enamelling cost in Allhallows-on-Sea?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Honest limits
A repair is not right for every job, including:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
Send us photos and we will tell you honestly.
What we work on
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.

