Medway · England
Bath re-enamelling & resurfacing in St Mary Hoo, Medway
Damaged bath in St Mary Hoo? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Several chips and rust patches
About our bath re-enamelling in St Mary Hoo
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Whether it’s enamel that’s lost its shine and feels rough and staining under the taps and around the waste, we can help.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- St Mary Hoo (ME3)
- County
- Medway
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Landlord and trade work in St Mary Hoo
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs in Medway and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Your questions about bath re-enamelling in St Mary Hoo
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we will ask for another angle.
Do you come to St Mary Hoo?
Yes. We cover the entire UK and come to St Mary Hoo. Send photos and we’ll quote, or call 0345 017 0787.
What areas do you cover?
We cover the whole UK, including St Mary Hoo and the rest of Medway. Send your postcode with your photos and we will offer you dates.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
How much does bath re-enamelling cost in St Mary Hoo?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Keeping it looking good
How the surface is treated afterwards matters:
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Repairing versus replacing in St Mary Hoo
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why St Mary Hoo clients choose us
- One-year guarantee on every repair
- Work done at your home or business
- No need to remove anything
- Typically one visit, start to finish
Read our full price list or resurfacing vs replacement cost guide.
What affects the price in St Mary Hoo
Resurfacing from £350. There’s no charge for travel to St Mary Hoo. The price comes down to:
- The material and finish
- How hard the colour is to match
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
Our prices are the same across the UK, so there is no premium for St Mary Hoo. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- One picture of the entire bath
- One sharp close-up of the damage
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Our work in St Mary Hoo
St Mary Hoo is about 4 miles south of Canvey Island, in Medway. Whether you’re in the middle of St Mary Hoo or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. St Mary Hoo is one of 68 places in Medway we cover. Our nearest city page is London, about 30 miles away.
Postcode districts we cover here: ME3. Nearby, we also work in Fenn Street (1 mile south-west), High Halstow (1 mile south-west), Sharnal Street (2 miles south-west), Tunbridge Hill (2 miles south) and Kingsnorth (2 miles south). Further out, we also cover Gillingham (6 miles south), Chatham (8 miles south), Rochester (6 miles south-west), Rainham (7 miles south), Strood (7 miles south-west) and Luton (7 miles south).
Landmarks near St Mary Hoo
Around St Mary Hoo, we work in homes near Church of St Mary. A little further out are Bay Museum (3.6 miles north) and Medway Maritime Hospital (6 miles south-west). The countryside around St Mary Hoo includes Bishop Saltings.
How the visit works
You don’t need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It typically takes a full day, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
Getting a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Places near St Mary Hoo
More services for St Mary Hoo
About our accreditations · Every repair comes with a one-year guarantee.
