Clackmannanshire · Scotland
Bath re-enamelling & resurfacing in Alloa, Clackmannanshire
Problem with your bath in Alloa? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A coating lifting around the plughole
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- The material
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- Any earlier repairs or coatings
- One picture of the whole bath
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
About our bath re-enamelling in Alloa
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you are dealing with brown or grey marks that don’t clean off and chips and rust in more than one place, we can usually put it right, whatever the material.
Big or small, you get the same one-year guarantee.
- Where
- Alloa (FK10)
- Region
- Clackmannanshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Alloa
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can I get a quote without a visit?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is there any odour?
Expect a mild smell while we are working.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
About Alloa
Alloa is about 14 miles west of Dunfermline, in Clackmannanshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 16 towns and villages in Clackmannanshire, from the larger towns to small villages. You can also see our page for Glasgow, about 26 miles away.
Our visits in FK10 work the same way as everywhere else we cover. You will find streets such as High Street, Holton Square and Main Street, and we cover them all. Alloa sits on or near the A907 and A908, so getting to you is simple. If you’re just outside Alloa, we cover Sauchie (1 mile north-east), Fishcross (1 mile north-east), Clackmannan (2 miles south-east), Coalsnaughton (3 miles north-east) and Devonside (3 miles north-east). Further out, we also cover Kincardine (5 miles south-east), Dollar (6 miles north-east) and Menstrie (3 miles north-west).
What’s near Alloa
Locally, our jobs take us to homes close to Alloa North Church, Alloa Academy and The Bobbing John pub, among other places. There is a railway station in Alloa itself: Alloa station. Well-known places in the area include Old Tulliallan Castle (3.8 miles south-east) and Alloa Museum And Gallery (under half a mile south). Green spaces nearby include Black Devon Wetlands RSPB Reserve and Myreton Hill.
Nearby places to Alloa
What else we do in Alloa
The process
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a full day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Clear the area around the damage
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
How to get a price
Most customers in Alloa get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- We leave the room as we found it
- No extra charge for your area
- Work done at your home or business
- Colours mixed by hand to suit your surface
Take a look at our prices page or resurfacing vs replacement cost guide.
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep suction mats out of the bath
- Don’t leave a chip unrepaired
- Store bottles off the bath
- Respect the curing time we give you
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Common problems we fix in Alloa
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
People generally call us after spotting something like this:
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
- Several chips and rust patches
- An old resurfacing that’s failing
What to look for in a quote
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
