Clackmannanshire · Scotland
Bath Re-enamelling for Devonside homes
Bath re-enamelling across Devonside and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Devonside
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s an old resurfacing that’s failing and a coloured bath you want in white, we can generally put it right.
Every repair comes with a one-year guarantee.
- Area
- Devonside (FK13)
- County
- Clackmannanshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Repair or replace in Devonside?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Devonside
- Most jobs done in one visit
- No extra charge for your area
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
Take a look at our prices page and resurfacing vs replacement cost guide.
Also near Devonside
Other services in Devonside
What we cannot put right
We would rather lose a job than do one that won’t last, so these are the limits:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Questions from Devonside
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
How much does bath re-enamelling cost in Devonside?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Can you price it without visiting?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Do you work in Devonside?
We do. We send a technician to Devonside for every job, and the price is the same as everywhere else.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Where the damage is and how we get to it
- The material and finish
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
About Devonside
Devonside is about 3 miles north-east of Alloa, in Clackmannanshire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Devonside is one of 16 places in Clackmannanshire we cover. Our nearest city page is Edinburgh, about 25 miles away.
Here we cover the FK13 postcode area. Jobs here include addresses on Ochilview, Alexandra Street and The Glen. We also cover the places around Devonside: Coalsnaughton (1 mile south), Tillicoultry (1 mile north), Fishcross (1 mile south-west), Sauchie (2 miles south-west) and Alloa (3 miles south-west). Larger places within reach include Tullibody (4 miles west), Kincardine (6 miles south), Dollar (3 miles north-east) and Menstrie (4 miles west).
Near you in Devonside
Around Devonside, we work in homes near Alva Academy and Tillicoultry, among other places. The nearest railway station is Alloa station, roughly 2.7 miles south-west of the centre. Well-known places in the area include Castle Campbell (3.2 miles north-east) and Alloa Museum And Gallery (2.9 miles south-west). For a walk, there is Gartmorn Dam Country Park and Nature Reserve and King's Seat Hill.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What we’re called out for in Devonside
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Signs it’s time to call us include:
- Several chips and rust patches
- A roll-top that’s seen better days
- An old resurfacing that is failing
- Thin, worn enamel in places
Questions to ask before booking
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- How your room will be protected
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
