Warwickshire · England
Bath Re-enamelling for Alne End homes
We travel to Alne End for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
Bath re-enamelling in Alne End, done in place
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. If you’re dealing with chips and rust in more than one place and a coating lifting around the plughole, we can help, on acrylic baths, cast iron baths and pressed steel baths alike.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Alne End (B49)
- Area hub
- Warwickshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a full day, tidy-up included.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Ask for a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
About Alne End
Alne End is about 6 miles north-west of Stratford-upon-Avon, in Warwickshire. Across the B49 area, a technician comes to you. Our repair technicians cover 324 places across Warwickshire. Our nearest city page is Birmingham, about 17 miles away.
Jobs in B49 work the same way as everywhere else we cover. Whether you live on Spernal Lane, Appleby Close and Nightingale Close or a nearby road, we can come to you. If you’re just outside Alne End, we cover Great Alne (1 mile north-east), Alcester (2 miles south-west), Kings Coughton (2 miles west), Oversley Green (2 miles south-west) and Spernall (2 miles north-west). We also work in nearby towns such as Warwick (11 miles east), Royal Leamington Spa (14 miles east), Stratford-upon-Avon (6 miles south-east), Leamington Spa (13 miles east), Kenilworth (14 miles north-east) and Shipston-on-Stour (15 miles south-east).
Local landmarks in Alne End
In Alne End, that means homes near Great Alne Primary School, Mother Huff Cap Inn Public House and Alcester Academy and the streets around them. The nearest railway station is Wootton Wawen station, roughly 3.1 miles north-east. Further afield, we also cover the area around Aston Cantlow (1.5 miles east) and Alexandra Hospital (4.7 miles north-west). Open spaces near Alne End include River Arrow Nature Reserve.
FAQs for Alne End
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Warwickshire.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- How easy the damage is to reach
- How many items we do on one visit
- How much damage there is
- Previous DIY repairs that have to come out
We charge the same wherever you are, so there is no premium for Alne End. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
It only takes a minute to photograph the damage. Try to send:
- The material, if you know it
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What we cannot put right
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Common problems we fix in Alne End
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is usually perfectly sound.
Signs it’s time to call us include:
- Worn patches where water runs and sits
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
- An old resurfacing that’s failing
What your quote should include
- How to look after the finish
- What happens if the damage is worse than the photos show
- How the colour is matched
- When it can be used again
Keeping it looking good
Once the work has cured, treat it gently:
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Towns and villages near Alne End
Also in Alne End
Landlords, agents and businesses in Alne End
We’re used to working with agents and managing companies. Send the address, photos and access details.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
