Warwickshire · England
Bath Re-enamelling for Great Alne homes
Our technicians come to Great Alne for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
How to care for the repair
To keep it looking its best:
- Rinse off hair dye, oils and bath bombs immediately
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Bath re-enamelling at your home in Great Alne
Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with a bath in a colour that no longer suits and a coating lifting around the plughole, we can normally put it right.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Great Alne (B49)
- Region
- Warwickshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Great Alne
What else we do in Great Alne
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Honest limits
Some jobs aren’t right for a repair, for example:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
Send us photos and we will tell you honestly.
Materials we work on in Great Alne
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
How the visit works
Your technician turns up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Let the surface dry out before the visit
- Keep a parking space free if you can
- Let us know about parking or access
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Your questions about bath re-enamelling in Great Alne
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do you cover the whole of Warwickshire?
All of Warwickshire, and the rest of the UK. Travel is included in the price.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
What happens once I’ve sent photos?
You’ll get a fixed quote back. There’s no obligation to book.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Great Alne. What changes the price is:
- How many items we do on one visit
- How easy the damage is to reach
- Any earlier repairs that need removing first
- What the surface is made of
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- Details of any past repairs
- The postcode, so we can plan the visit
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Do you need bath re-enamelling in Great Alne?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
It’s worth getting a quote if you see:
- Lots of chips and rust spots
- A coating lifting around the plughole
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Questions to ask before you book
- What happens if they find more damage
- A fixed quote, and whether VAT is included
- What preparation is included
- Whether a trained technician does the job
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Where we work around Great Alne
Great Alne is about 6 miles north-west of Stratford-upon-Avon, in Warwickshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Great Alne is one of 324 places in Warwickshire where we work. You can also see our page for Birmingham, about 17 miles away.
All of B49 is within our area. Whether you live on Woodland Drive and The Laurels or a nearby road, a technician can come to you. With the B4089 close by, Great Alne is easy for our repair technicians to reach. Neighbouring places we cover include Alne End (1 mile south-west), Alcester (2 miles south-west), Kings Coughton (2 miles west), Oversley Green (2 miles south-west) and Spernall (2 miles north-west). Larger places within reach include Warwick (11 miles east), Royal Leamington Spa (13 miles east), Stratford-upon-Avon (6 miles south-east), Leamington Spa (13 miles east), Kenilworth (13 miles north-east) and Shipston-on-Stour (15 miles south-east).
Near you in Great Alne
Locally, our jobs take us to homes close to Mother Huff Cap Inn Public House, Great Alne Primary School and Alcester Academy, among other places. The closest station to Great Alne is Wootton Wawen station, roughly 2.7 miles north-east of the centre. Further afield, we also cover the area around Aston Cantlow (1.1 miles east) and Roman Alcester Museum (2.5 miles south-west). Not far away are River Arrow Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
