Isle of Anglesey · Wales
Non-Slip Bath Coating in Amlwch Community
Our repair technicians come to Amlwch Community for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Non-slip bath coating at your home in Amlwch Community
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you are dealing with bath mats that harbour mould or get forgotten and safety for older or less mobile people, we can help, on resurfaced baths, enamelled baths and shower trays alike.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Amlwch Community (LL68, LL66)
- Region
- Isle of Anglesey
- Cover
- A year, on every repair
- Quote
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a few hours in most cases. We leave the room clean and you will know when it can be used.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- We leave it to cure, typically overnight.
Before we arrive
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Read more
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
If you manage property in Amlwch Community, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
What a repair cannot fix
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we work on in Amlwch Community
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
- Acrylic baths
Repair or replace in Amlwch Community?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- One price list for the entire UK
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- A year’s guarantee on all work
Take a look at our full price list.
When to call us in Amlwch Community
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Common reasons people in Amlwch Community contact us include:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Before booking anyone
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
- How the colour is matched
- Whether there are any call-out or travel charges
Covering Amlwch Community
Amlwch Community is about 13 miles north-east of Blackbridge, in Isle of Anglesey. Jobs in Amlwch Community are booked in like any other job: a fixed price from your photos, then a visit to do the work. Amlwch Community is one of 115 towns and villages in Isle of Anglesey we cover. Our nearest city page is Liverpool, about 59 miles away.
Here we cover the LL68 and LL66 postcode area. From Y Lincs, Lon Bach and Maes Mona or anywhere nearby, we can come to you. Amlwch Community is on the A5025, so it’s easy for us to reach. Neighbouring places we cover include Penrhyd Lastra (1 mile south), Pentrefelin (1 mile north-east), Burwen (1 mile north), Amlwch (1 mile north-east) and Porthllechog (1 mile north). Larger places within reach include Holyhead (13 miles south-west), Blackbridge (13 miles south-west), Porth-y-Felin (13 miles south-west), Llangefni (10 miles south), Menai Bridge (14 miles south-east) and Stryd (13 miles south-west).
Around Amlwch Community
Our customers here include homes close to The Market Tavern, Our Lady Star of the Sea and St Winefride and Ysgol Syr Thomas Jones, among other places. Well-known places in the area include Sail Loft Museum (1.5 miles north-east) and Castell Porth Wen (1.9 miles north-west). The countryside around Amlwch Community includes Parys Mountain and Llyn Llaethdy.
Common questions in Amlwch Community
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you cover Amlwch Community?
Yes. We work across the UK and come to Amlwch Community and the rest of Isle of Anglesey. Send photos and we’ll quote, or call 0345 017 0787.
What happens next?
You get a fixed quote and available dates. If we need another angle, we will ask.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
What non-slip bath coating costs
There’s no charge for travel to Amlwch Community. The price depends on:
- Previous DIY repairs that have to come out
- What kind of damage it is
- The material and finish
- The colour and finish to match
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what helps:
- Something in shot to show the size
- One sharp close-up of the damage
- A wider photo showing the entire bath or shower tray
- Where you are, by postcode
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Places near Amlwch Community
Also in Amlwch Community
About our accreditations · Every repair comes with a one-year guarantee.
