Hampshire · England
Bath re-enamelling & resurfacing in Anmore, Hampshire
Fixed-price bath re-enamelling in Anmore and the surrounding area, normally in one visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- Doing more than one item at once
- How many areas need work
- The material and finish
- Whether old repairs or coatings need taking off
Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send photos for a quote
Before you send pictures, these tips help us give you a firm price:
- A photo taken from further back
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
How we handle bath re-enamelling in Anmore
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Typical jobs include stains that won’t shift and a period or roll-top bath worth keeping, in Victorian roll-tops, acrylic baths and pressed steel baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Location
- Anmore (PO7)
- Region
- Hampshire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Steel that has corroded right through
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Nearby places to Anmore
What else we do in Anmore
Keeping it looking good
Nothing complicated is needed:
- Get any chip repaired quickly
- Respect the curing time we give you
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Common questions in Anmore
Is there any odour?
There may be a mild smell during the work that clears as it cures.
How long is the bath unusable?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
How much does bath re-enamelling cost in Anmore?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Nothing taken out or refitted
- Honest advice, even when it means no job
- Same prices wherever you are
- We leave the room as we found it
Take a look at our full price list and bath cost comparison.
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes the best part of a day for most jobs. We leave the room clean.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Tell us about any previous repairs or coatings
- Open a window if you can
- Let us know which floor the room is on
Ask for a price
If you’re in Anmore and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Anmore and the surrounding area
Anmore is about 1 mile north-west of Waterlooville, in Hampshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. We work in 683 places across Hampshire, from the larger towns to small villages. You can also see our page for London, about 58 miles away.
We work across the PO7 postcode area and the streets around it. We regularly work on streets such as Anmore Road and Soake Road and the roads around them. Neighbouring places we cover include Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). Within a short drive, we also cover Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Landmarks near Anmore
Around Anmore, we work in homes near The Mead End, Denmead Infant School and The Cowplain School, among other places. For rail, the closest station is Bedhampton station, about 4 miles south-east. Nearby you will also find Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). For a walk, there’s St Clair's Meadow and Windmill Hill.
Landlord and trade work in Anmore
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
