Hampshire · England

Bath Resealing in Anmore

Our technicians come to Anmore for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Old sealant that looks dirty
  • A messy previous reseal
  • Mould you can’t clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Anmore

How we handle bath resealing in Anmore

Baths are resealed with water in them, so the joint opens fully, so the seal does not tear when the bath is first used. Whether it’s discoloured, yellow sealant and damp near the bath, we can help, on basins & vanity units, wet rooms and baths alike.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

Area
Anmore (PO7)
County
Hampshire
Cover
12 months on all our work
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Landlord and trade work in Anmore

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Anmore and nearby

Anmore is about 1 mile north-west of Waterlooville, in Hampshire. Anywhere in PO7, we come to you. Our technicians cover 683 places across Hampshire, from the larger towns to small villages. Our jobs stretch from Anmore to London (58 miles away).

Every address in PO7 is covered, from the main roads to the quietest streets. That includes homes on Anmore Road and Soake Road. Other places close to Anmore include Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). Larger places within reach include Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).

Landmarks near Anmore

Our customers here include homes close to The Mead End, Denmead Infant School and The Cowplain School, among other places. Anmore’s nearest station is Bedhampton station, about 4 miles south-east of the centre. A little further out are Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). For a walk, there’s St Clair's Meadow and Windmill Hill.

Map of Anmore © OpenStreetMap contributors

Your questions about bath resealing in Anmore

Do you seal over the old sealant?

Never over old. It’s removed, cleaned off and the joint dried first.

What does bath resealing cost?

The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

What happens once I’ve sent photos?

We review the photos and send a fixed quote with dates.

Which areas do you work in?

We cover the entire UK, including Anmore and the rest of Hampshire. Send your postcode with your pictures and we will confirm dates.

Can you quote from photos?

Usually, yes. Clear pictures let us give you a fixed price without visiting.

When can I use the bath after resealing?

You’ll get the curing time from us.

Is there any odour?

It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.

What a repair can’t fix

We will not take on work that won’t last, so here’s what a repair can’t put right:

  • Hollow or loose tiles
  • A flexing bath
  • Rotten walls or floors behind the bath

Send us pictures and we’ll tell you honestly.

What we work on

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Wet rooms
  • Baths
  • Basins & vanity units

Why reseal now?

A reseal is one of the cheapest bathroom jobs there is, and it protects everything around the bath. Leaving failed sealant can let water cause damage that costs far more to fix. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why Anmore customers choose us

  • Dust sheets down, tidy finish
  • A fixed quote before you book
  • CHAS and Constructionline accredited
  • Every repair guaranteed for a year

See our pricing.

Different materials, different repairs

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Prices and what affects them

Every quote is fixed and free. What we look at:

  • Where the damage is and how we get to it
  • How hard the colour is to match
  • What kind of damage it is
  • Previous DIY repairs that have to come out

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send photos for a quote

A couple of clear pictures is all it takes. Try to include:

  • Details of any past repairs
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area
  • Any details about the material

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.

What happens on the day

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow about two hours for a bath. Before we go, we’ll explain how long to leave it and how to care for it.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

How to prepare

  • Make sure the area is dry
  • Clear toiletries, mats and anything else from around the area
  • Mention any parking restrictions or tricky access

Get a quote

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Send pictures for a quote

Read more

Do you need bath resealing in Anmore?

Most reseals are because of black mould. It grows into the sealant itself, so cleaning can’t get it all out.

The things customers generally mention when they call are:

  • An untidy old seal
  • Gaps by the taps
  • Sealant that is split or lifting
  • Black mould in the sealant

Questions to ask before you book

  • How changes to the job are handled
  • Is the price fixed, and does it include VAT?
  • How long the guarantee is and what it covers
  • Whether they match the colour on site

How to compare quotes

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.