Hampshire · England
Bath re-enamelling & resurfacing in Hambledon, Hampshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Hambledon. Send photos for a free, fixed quote.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- A fixed quote before booking
- Same prices wherever you are
- Every repair guaranteed for a year
- Nothing taken out or refitted
Take a look at our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Hambledon, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Typical jobs include worn patches where water runs and sits and a coating lifting around the plughole, on pressed steel baths, basins & shower trays and Victorian roll-tops.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Hambledon (PO7)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Looking after the surface is easy:
- Don’t leave a chip unrepaired
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Wash away dyes and oils after use
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
What affects the price in Hambledon
Prices start from £350. We charge the same across the UK, including Hambledon. What changes the price is:
- The material and finish
- What kind of damage it is
- Any earlier repairs that need removing first
- Doing more than one item at once
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Most quotes are done from pictures alone. To help us price it:
- Any earlier repairs or coatings
- Where you are, by postcode
- Natural light rather than flash
- Something in shot to show the size
To get a price, send a couple of pictures using our quote form or call us. We’ll say right away whether it can be repaired.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Hambledon and the surrounding area
Hambledon is about 4 miles north-west of Horndean, in Hampshire. Wherever you are in the PO7 postcode area, we come to you. We work in 683 places across Hampshire, from the larger towns to small villages. Our jobs stretch from Hambledon to London (about 58 miles away).
All of PO7 is covered. Whether you live on High Street, West Street and The Maltings or a nearby road, we can come to you. Close by, we cover Anthill Common (1 mile south), Denmead (2 miles south-east), Anmore (3 miles south-east), Lovedean (3 miles south-east) and Wecock Farm (3 miles south-east). Further out, we also cover Winchester (13 miles north-west), Gosport (9 miles south), Havant (6 miles south-east), Eastleigh (12 miles west), Fareham (7 miles south-west) and Horndean (4 miles south-east).
What’s near Hambledon
We visit homes around Hambledon Primary School, The Vine pub and Church of St Peter and St Paul and the streets around them. A little further out are Queen Alexandra Hospital (5.5 miles south) and Clanfield Earthwork (4.7 miles east). Not far away are Wether Down and St Clair's Meadow.
Nearby places to Hambledon
What else we do in Hambledon
Common questions in Hambledon
Do you work in Hambledon?
Yes, we do. We send a technician to Hambledon for every job, and the price is the same as everywhere else.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
What happens after I send photos?
You’ll get a fixed quote back, plus dates. There is no obligation to book.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Are there extra charges for Hambledon?
No. Our quotes include travel, and we charge the same wherever you are.
Do you cover the whole of Hampshire?
We work UK-wide, and that includes Hambledon. Our prices are the same everywhere.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Honest limits
In fairness, there are a few things a repair will not fix:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Do you need bath re-enamelling in Hambledon?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Get in touch if you’ve noticed:
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
- A coloured bath you want in white
What to look for in a quote
- Whether the colour is mixed to match
- What prep work is covered
- How your room will be protected
- How changes to the job are handled
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to the best part of a day.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the next day.
Getting ready for the visit
- Make sure the area is dry
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
