Nottinghamshire · England
Bath re-enamelling & resurfacing in Annesley, Nottinghamshire
Full bath re-enamelling and resurfacing in Annesley, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Several chips and rust patches
Bath re-enamelling in Annesley, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We work on pressed steel baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are a coating lifting around the plughole and brown or grey marks that don’t clean off.
A one-year guarantee comes as standard.
- Location
- Annesley (NG17, NG15)
- Region
- Nottinghamshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
It helps to know what we cannot do too:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:
- The size and number of damaged areas
- Access to the area
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not your postcode. The full price is agreed before booking.
Send photos for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- A wider photo showing the entire bath
- Where you are, by postcode
For a price in Annesley, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Covering Annesley
Annesley is about 2 miles south of Kirkby-in-Ashfield, in Nottinghamshire. From the centre of Annesley to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 329 places in Nottinghamshire, from the larger towns to small villages. We work right across the region, from Annesley to Manchester (49 miles away).
All of NG17 and NG15 is within our area, from the main roads to the quietest streets. From Derby Road, Byron Road and Forest Road or anywhere nearby, we can come to you. Close by, we cover Annesley Woodhouse (1 mile north-west), Newstead (1 mile south-east), Kirkby Woodhouse (1 mile north-west), Felley (2 miles south-west) and Linby (2 miles south-east). Further out, we also cover Mansfield (5 miles north-east), Beeston (11 miles south), Carlton (10 miles south-east), Sutton in Ashfield (4 miles north), Hucknall (3 miles south-east) and West Bridgford (12 miles south-east).
What’s near Annesley
Locally, our jobs take us to homes close to All Saints' Church, Badger Box pub and Annesley Primary and Nursery School and the streets around them. For rail, the closest station is Newstead station, about 0.9 miles south-east. A little further out are Ashfield Community Hospital (1.8 miles north) and Greasley Castle (4.2 miles south).
FAQs for Annesley
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
The process
We agree an arrival time beforehand, so you’re not left guessing. Once we are there, the work takes the best part of a day in most cases. The room is left tidy and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Make sure the room can be ventilated
Get a quote
Email us a photo of the damage and a wider shot of the entire item, and tell us you are in Annesley, and we will come back with a fixed quote.
Related advice
Places near Annesley
Also in Annesley
Repairing versus replacing in Annesley
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the entire surface without moving it. Prices start from £350. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Dust sheets down, tidy finish
- One visit for most repairs
- No extra charge for your area
- Colour-matched on site
Take a look at our full price list or resurfacing vs replacement cost guide.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
What we’re called out for in Annesley
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The things customers typically mention when they call include:
- An old resurfacing that is failing
- Wear marks under the taps
- Brown or grey marks that don’t clean off
- A dull, rough surface that will not come clean
What to look for in a quote
- What preparation is included
- When it can be used again
- Is the price fixed, and does it include VAT?
- How your room will be protected
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
