Coventry · England
Bath Re-enamelling for Ernesford Grange homes
Our technicians come to Ernesford Grange for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
- Store bottles off the bath
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
About our bath re-enamelling in Ernesford Grange
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on basins & shower trays, Victorian roll-tops and cast iron baths, and common reasons people get in touch are brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Ernesford Grange (CV3, CV2)
- County
- Coventry
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Ernesford Grange
More services for Ernesford Grange
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
What a repair can’t fix
A repair isn’t right for every job, for example:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A metal bath with a through crack
Send us photos and we’ll tell you honestly.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Common problems we fix in Ernesford Grange
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, normally first under the taps and around the waste.
Clients usually contact us about:
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
- Wear marks under the taps
Before you book anyone
- Who will actually do the work
- What preparation is included
- Whether the colour is mixed to match
- If travel is included in the price
FAQs for Ernesford Grange
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Are there extra charges for Ernesford Grange?
No. Our quotes include travel, with the same prices everywhere we work.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Covering Ernesford Grange
Ernesford Grange is about 2 miles south-east of Coventry, in Coventry. Across the CV3 area, we carry out the work at your property. Ernesford Grange is one of 88 places in Coventry where we work. Our jobs stretch from Ernesford Grange to Birmingham (19 miles away).
We work across the CV3 and CV2 postcode area. Jobs here include addresses on Chard Road, Badger Road and Foxton Road and the roads around them. You will find Ernesford Grange on the A4082, which makes it straightforward to reach. Neighbouring places we cover include Binley (1 mile east), Willenhall (1 mile south-west), Stoke Aldermoor (1 mile west), Toll Bar End (1 mile south) and Whitley (2 miles west). Within a short drive, we also cover Radford (3 miles north-west), Foleshill (3 miles north), Wood End (3 miles north), Bell Green (3 miles north), Edgwick (3 miles north-west) and Earlsdon (3 miles west). As one of the bigger places in Coventry, Ernesford Grange sees plenty of our work.
Landmarks near Ernesford Grange
Around Ernesford Grange, we work in homes near The Biggin Hall pub, Pattison College and Sowe Valley Primary School, among other places. You’ll also find Ernesford Grange School & Community College (less than half a mile east) and Church of St John the Divine (0.6 miles south-west). Ernesford Grange’s nearest station is Coventry station, roughly 2.4 miles west of the centre. A little further out are Arena Park Shopping Centre (3.7 miles north-west) and Caludon Castle (1.6 miles north). Green spaces nearby include Brandon Marsh.
Repair or replace in Ernesford Grange?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Ernesford Grange. What changes the price is the job itself: the material, the amount of damage and how many items.
Why choose Surface Doctor in Ernesford Grange
- Most jobs done in one visit
- Everything repaired in place
- Rooms protected and left tidy
- One-year guarantee on every repair
Take a look at our prices page or bath cost comparison.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- Doing more than one item at once
- Where the damage is and how we get to it
- The type of damage
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- A photo taken from further back
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We clean up when we are done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
- Clear the area around the damage
Getting a price
Email us a picture of the damage and one of the entire item, with your CV3 postcode, and we’ll reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
