Cheshire West and Chester · England
Bath Re-enamelling in Antrobus
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Antrobus. Free, fixed quotes from your photos.
- Resurfacing from £350
- Worn patches where water runs and sits
- Several chips and rust patches
How we handle bath re-enamelling in Antrobus
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include wear marks under the taps and several chips and rust patches, in acrylic baths, Victorian roll-tops and cast iron baths.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Antrobus (CW9)
- Area hub
- Cheshire West and Chester
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Colour mixed on the day to match
- No need to remove anything
- Work done at your home or business
- Fixed prices from your pictures
Read our full price list and guide to resurfacing and replacement costs.
Our work in Antrobus
Antrobus is about 4 miles north of Northwich, in Cheshire West and Chester. We visit homes and businesses in Antrobus and the surrounding area, so nothing has to leave your home. We cover 224 places in Cheshire West and Chester, from the larger towns to small villages. We work right across the region, from Antrobus to Manchester (17 miles away).
Here we cover the CW9 postcode area. Streets in the area include Lowe Crescent, Knutsford Road and The Old Orchard, and we cover them all. We also travel to Frandley (1 mile west), Gibb Hill (1 mile south-east), Budworth Heath (1 mile south-east), Higher Whitley (2 miles west) and Lower Whitley (2 miles west). We also work in nearby towns such as Winsford (8 miles south), Northwich (4 miles south), Frodsham (8 miles west), Whitby (15 miles west), Hartford (5 miles south) and Over (9 miles south).
Local landmarks in Antrobus
Typical jobs here are in homes near Cransley School, St Mark's Church and Antrobus St Mark's CofE Primary School and the streets around them. The closest station to Antrobus is Northwich station, about 3.9 miles south-east of the centre. Well-known places in the area include Northwich Infirmary (3.6 miles south). Open spaces near Antrobus include Marbury Reedbed Nature Reserve and Neumann's Flash.
Questions from Antrobus
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Do you work in Antrobus?
We do. We send a technician to Antrobus for every job, with no extra charge for travel.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Antrobus
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
Getting a price
Most customers in Antrobus get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Have chips seen to early
- A dripping tap should be fixed promptly
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Nearby places to Antrobus
Other services in Antrobus
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Antrobus. The price reflects:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
