Kent · England
Bath Re-enamelling for Anvil Green homes
Bath re-enamelling in and around Anvil Green: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Bath re-enamelling in Anvil Green, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Our technicians work on basins & shower trays, Victorian roll-tops and cast iron baths, and common reasons people get in touch are enamel that’s lost its shine and feels rough and a peeling or bubbling previous coating.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Anvil Green (CT4)
- County
- Kent
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
Some jobs are not right for a repair, for example:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- A bath that’s rusted through
Send us pictures and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Places near Anvil Green
Other services in Anvil Green
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How hard the colour is to match
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
When you take your pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- Details of any past repairs
- A photo taken from further back
To get a price, send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Where we work around Anvil Green
Anvil Green is about 5 miles south-west of Wincheap, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 922 towns and villages across Kent. Our jobs stretch from Anvil Green to London (about 52 miles away).
Our visits in CT4 are booked in the same way as anywhere else. Nearby, we also work in Petham (2 miles north-east), Garlinge Green (2 miles north), Mystole (3 miles north), Upper Hardres (3 miles east) and Shalmsford Street (3 miles north). Further out, we also cover Ashford (8 miles south-west), Canterbury (6 miles north-east), Dover (13 miles east), Sittingbourne (15 miles north-west), Folkestone (11 miles south-east) and Whitstable (10 miles north).
Around Anvil Green
Our customers here include homes close to Church of St Bartholomew and Compasses Inn and the streets around them. For rail, the closest station is Chilham station, about 3.1 miles north-west. Well-known places in the area include Chilham Castle (3.5 miles north-west) and Kent and Canterbury Hospital (5.1 miles north-east).
Anvil Green: your questions answered
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Which areas do you work in?
The entire UK, including all of Kent. Just include your postcode and we will confirm dates.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Can you fix a peeling bath coating?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Landlords, agents and businesses in Anvil Green
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a full day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Let us know about parking or access
Getting a price
If you’re in Anvil Green and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Looking after it afterwards
Looking after the surface is easy:
- Use washing-up liquid and a soft cloth
- Do not use the bath until it has fully cured
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Repairing versus replacing in Anvil Green
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. Our prices are the same across the UK, with no extra for Anvil Green. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Most jobs done in one visit
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
- We leave the room as we found it
Read our prices page or resurfacing vs replacement cost guide.
Common problems we fix in Anvil Green
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
These are the problems we’re asked about most:
- A roll-top that’s seen better days
- A dull, rough surface that will not come clean
- An old resurfacing that is failing
- Worn patches where water runs and sits
Before you book anyone
- When it can be used again
- Who will actually do the work
- How your room will be protected
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
