North Ayrshire · Scotland
Bath re-enamelling & resurfacing in Ardeer, North Ayrshire
Full bath re-enamelling and resurfacing in Ardeer, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- An outdated colour you’d like to change
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The material and finish
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How many areas need work
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
Photographing the damage takes a minute. Try to send:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- A wider photo showing the whole bath
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Bath re-enamelling in Ardeer, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s a dull, rough surface that won’t come clean and several chips and rust patches, we can help.
Big or small, it’s backed by a one-year guarantee in Ardeer and across North Ayrshire.
- Location
- Ardeer (KA20)
- County
- North Ayrshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Ardeer
More services for Ardeer
Keeping it looking good
To keep it looking its best for years:
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
Dry the bath after use if possible, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What we cannot put right
Before booking, it’s worth knowing the limits too:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A bath that’s rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Ardeer
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For landlords and businesses
Landlords, letting agents and housing providers in Ardeer use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you’re in Ardeer, and we’ll reply with a fixed quote.
Related advice
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
What you get with us
- Colour-matched on site
- One-year guarantee on every repair
- One visit for most repairs
- We leave the room as we found it
See our prices page and resurfacing vs replacement cost guide.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Our work in Ardeer
Ardeer is about 1 mile south-east of Stevenston, in North Ayrshire. Wherever you are in the KA20 postcode area, we come to you. Ardeer is one of 53 places in North Ayrshire we cover. We work right across the region, from Ardeer to Glasgow (24 miles away).
We cover every part of KA20 and the streets around it. You will find streets such as Shore Road, Golf Avenue and Garven Road. Neighbouring places we cover include Stevenston (1 mile north-west), Auchenharvie (2 miles north-west), Kilwinning (2 miles north-east), Saltcoats (2 miles north-west) and Girdle Toll (3 miles east). Further out, we also cover Irvine (3 miles east), Largs (13 miles north-west), Ardrossan (3 miles north-west), Kilbirnie (9 miles north), West Kilbride (7 miles north-west) and Beith (9 miles north-east).
Landmarks near Ardeer
Locally, our jobs take us to homes close to Glencairn Primary School, Ardeer Church Of Scotland and Stevenston Beach. The closest station to Ardeer is Stevenston station, roughly 0.9 miles north-west of the centre. Nearby you’ll also find Kerelaw Castle (1.7 miles north-west) and Woodland View (2.1 miles east). The countryside around Ardeer includes Stevenston Loch.
Ardeer questions
How long does re-enamelling take?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you cover Ardeer?
Yes. We work across the UK and travel to Ardeer. Send photos and we’ll quote, or call 0345 017 0787.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
What information do you need?
Use the quote form or ring 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
