Argyll and Bute · Scotland

Bath Re-enamelling in Ardminish

Bath re-enamelling across Ardminish and nearby, normally in one visit.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Ardminish

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

How we handle bath re-enamelling in Ardminish

Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and the jobs we see most are a bath that stays dull however much you clean it and a coating lifting around the plughole.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.

Stained basin resurfaced to clean white (before and after)
Where
Ardminish (PA41)
Region
Argyll and Bute
Warranty
A year, on every repair
Quotes
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

Common questions in Ardminish

Do you need to take the bath out?

Not at all. We work on the bath in place, with the room protected and ventilated.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

How much does bath re-enamelling cost in Ardminish?

Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the whole item and your postcode.

Is there a smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Can a failed resurfacing be redone?

Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

Can you repair something that’s been repaired before?

Typically, yes. The old repair comes out first, so let us know about it.

When to call us in Ardminish

Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.

The most common problems we’re called about are:

  • Worn patches where water runs and sits
  • Staining under the taps and around the waste
  • An original cast iron bath that needs restoring
  • A bath that stays dull however much you clean it

Before you book anyone

  • How changes to the job are handled
  • Whether there are any call-out or travel charges
  • How to care for the finish
  • The length of the guarantee and what it covers

10 questions to ask before you book

Repair or replace: which is better?

Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before you book.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • Every repair guaranteed for a year
  • Typically one visit, start to finish
  • Fixed prices from your photos

Take a look at our pricing or guide to resurfacing and replacement costs.

How we price bath re-enamelling

Prices start from £350. Each job gets its own fixed price. These are the things that affect it:

  • Doing more than one item at once
  • The size and number of damaged areas
  • The material
  • Unusual colours or finishes

Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

How to get a fixed price

You can normally get a fixed price without us visiting. To help us price it:

  • Any earlier repairs or coatings
  • Natural light rather than flash
  • Where you are, by postcode
  • Any details about the material

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Ardminish and the surrounding area

Ardminish is about 37 miles west of Saltcoats, in Argyll and Bute. We visit homes and businesses in Ardminish and nearby villages, so there’s no workshop to go to. Ardminish is one of 118 towns and villages in Argyll and Bute where we work. We work right across the region, from Ardminish to Glasgow (about 58 miles away).

Every address in PA41 is within our area, from the main roads to the quietest streets. Whether you live on Raon Mor and Grianan or anywhere nearby, a technician can come to you. We also travel to Clachan (9 miles north-east), Carradale (12 miles south-east), Whitehouse (13 miles north-east), Craighouse (14 miles north-west) and Pirnmill (14 miles east). If you’re somewhere remote, ring us first and we will plan the trip.

Local landmarks in Ardminish

Locally, our jobs take us to homes close to Gigha Parish Church, among other places. A little further out are Largie Castle (3.8 miles east). Not far away are Mill Loch and Cnoc Na Croise.

Map of Ardminish © OpenStreetMap contributors

Honest limits

It helps to know what we can’t do:

  • A bath that is rusted through
  • A poorly supported acrylic bath, until it’s firmed up
  • Anything hidden under an old coating, until we remove it

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Ardminish

  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths

Materials and what they mean for the repair

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

How the visit works

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Point us to the nearest place to park
  • Let us know if it has been repaired before

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Get a free quote

Read more

Work for landlords and builders

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We carry out planned and one-off repairs for housing associations and facilities teams in Argyll and Bute and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.