Staffordshire · England
Bath Re-enamelling for Armitage homes
Bath re-enamelling in Armitage without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- Worn patches where water runs and sits
Our work in Armitage
Armitage is about 3 miles south-east of Rugeley, in Staffordshire. Clients in Armitage get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Armitage is one of 512 places in Staffordshire we cover. We work right across the region, from Armitage to Birmingham (about 19 miles away).
All of WS15 is covered, from the main roads to the quietest streets. We regularly work on streets such as Copse Drive, Shelley Close and Shropshire Brook Road and the roads around them. Other places close to Armitage include Handsacre (1 mile east), Tuppenhurst (1 mile east), Mavesyn Ridware (1 mile north-west), Longdon (1 mile south-west) and Hill Ridware (1 mile north). Further out, we also cover Stafford (11 miles north-west), Burton upon Trent (11 miles north-east), Tamworth (11 miles south-east), Cannock (7 miles south-west), Lichfield (4 miles south-east) and Rugeley (3 miles north-west).
Around Armitage
We visit homes around Hayes Meadow Primary School, The Crown Inn and Church of St John. The nearest railway station is Rugeley Town station, about 2.8 miles west of the centre. A little further out are Cannock Castle Ring (3.2 miles south-west) and St Matthew's Hospital (4 miles south). Open spaces near Armitage include George's Hayes and Stowe Pool.
Bath re-enamelling in Armitage, done in place
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We regularly repair Victorian roll-tops, pressed steel baths and cast iron baths, and the jobs we see most are several chips and rust patches and a peeling or bubbling previous coating.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Armitage (WS15)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Open a window if you can
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
Get a quote
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Related advice
What affects the price in Armitage
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- How many items we do on one visit
- What kind of damage it is
- How easy the damage is to reach
- Unusual colours or finishes
Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- The material, if you know it
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A clear, close picture of the problem area
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
What we can’t put right
Before you book, it’s worth knowing the limits:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- A bath that’s rusted through
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Do you need bath re-enamelling in Armitage?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Common reasons people in Armitage contact us are:
- A coating lifting around the plughole
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- Worn patches where water runs and sits
Comparing quotes
- How the room is protected while they work
- If travel is included in the price
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why us?
- Nothing taken out or refitted
- Rooms protected and left tidy
- One price list for the whole UK
- We’ll tell you if it’s not worth repairing
Take a look at our pricing or guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Armitage
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
What areas do you cover?
Across the UK, and that includes Armitage. Prices don’t change with location.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Is a repair better than a new one?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you come to Armitage?
Yes, we do. Repair technicians travel to Armitage from across the region, and the price is the same as everywhere else.
Are there extra charges for Armitage?
No. Our quotes include travel, and we charge the same wherever you are.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Respect the curing time we give you
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs immediately
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Nearby places to Armitage
More services for Armitage
About our accreditations · Every repair comes with a one-year guarantee.
