Staffordshire · England
Bath re-enamelling & resurfacing in Hill Ridware, Staffordshire
Bath re-enamelling in and around Hill Ridware: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Chips and rust in more than one place
Common problems we fix in Hill Ridware
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Look out for any of the following:
- Wear marks under the taps
- A roll-top that’s seen better days
- An old resurfacing that is failing
- Lots of chips and rust spots
What to look for in a quote
- How changes to the job are handled
- Who turns up on the day
- Whether there are any call-out or travel charges
- What preparation is included
Bath re-enamelling in Hill Ridware without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Typical jobs include thin, worn enamel in places and a period or roll-top bath worth keeping, across pressed steel baths, cast iron baths and basins & shower trays.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Hill Ridware (WS15)
- Area hub
- Staffordshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Hill Ridware and nearby
Hill Ridware is about 2 miles east of Rugeley, in Staffordshire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Hill Ridware is one of 512 places in Staffordshire we cover. You can also see our page for Birmingham, about 20 miles away.
We work across the WS15 postcode area and the streets around it. Jobs here include addresses on School Lane, Mavesyn Close and Holly Hurst. We also travel to Mavesyn Ridware (1 mile south), Pipe Ridware (1 mile east), Armitage (1 mile south), Handsacre (1 mile south-east) and Blithbury (2 miles north). Within a short drive, we also cover Stafford (10 miles west), Burton upon Trent (11 miles east), Tamworth (12 miles south-east), Cannock (7 miles south-west), Lichfield (6 miles south-east) and Burntwood (6 miles south).
Landmarks near Hill Ridware
We visit homes around Henry Chadwick Primary School and Church of St Nicholas, among other places. For rail, the closest station is Rugeley Trent Valley station, about 2.3 miles west of the centre. Well-known places in the area include St Matthew's Hospital (5.1 miles south) and Cannock Castle Ring (3.9 miles south-west). Not far away are George's Hayes.
Repairing versus replacing in Hill Ridware
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why Hill Ridware customers choose us
- Colour mixed on the day to match
- One visit for most repairs
- One price list for the entire UK
- Everything repaired in place
Read our full price list and resurfacing vs replacement cost guide.
What we cannot put right
A repair isn’t right for every job, including:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Hill Ridware
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Common questions in Hill Ridware
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can I get a quote without a visit?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Nearby places to Hill Ridware
More services for Hill Ridware
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Landlords, agents and businesses in Hill Ridware
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Make sure the room can be ventilated
- Let the surface dry out before the visit
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Read more
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- How hard the colour is to match
- The size and number of damaged areas
- The type of damage
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
When you take your pictures, a few simple things make all the difference:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A wider photo showing the entire bath
- What it’s made of, if you know
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
