Shropshire · England
Bath re-enamelling & resurfacing in Ash Parva, Shropshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Ash Parva. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
About our bath re-enamelling in Ash Parva
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Our technicians work on acrylic baths, basins & shower trays and cast iron baths, and people most often call us about stains that won’t shift and thin, worn enamel in places.
All our work comes with our one-year guarantee, wherever you are in Shropshire.
- Where
- Ash Parva (SY13)
- Area hub
- Shropshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £350. You will know the full cost before you book. We take into account:
- Previous DIY repairs that have to come out
- The material
- Unusual colours or finishes
- How many items we do on one visit
We charge the same wherever you are, with no extra for Ash Parva. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
Two or three clear photos are typically enough. Try to include:
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
Send us a picture of the damage and a wider shot of the entire item, with your SY13 postcode, and we will reply with a fixed price.
Places near Ash Parva
More services for Ash Parva
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Ash Parva
- Everything repaired in place
- Colour mixed on the day to match
- We will tell you if it’s not worth repairing
- Usually one visit, start to finish
Read our full price list and bath cost comparison.
Where we work around Ash Parva
Ash Parva is about 7 miles north-west of Market Drayton, in Shropshire. Whether you’re in the middle of Ash Parva or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 433 places across Shropshire, from the larger towns to small villages. Our nearest city page is Liverpool, about 34 miles away.
We work across SY13. We also travel to Ash Magna (1 mile north), Ash (1 mile west), Catteralslane (1 mile north-west), Broughall (1 mile north-west) and Heathlane (1 mile west). Larger places within reach include Market Drayton (7 miles south-east), Wem (7 miles south-west), Ellesmere (11 miles west), Harlescott (15 miles south), Loggerheads (10 miles east) and Baschurch (14 miles south-west).
Local landmarks in Ash Parva
Locally, our jobs take us to homes close to White Lion pub, Sir John Talbot's School and Christ Church, among other places. The nearest railway station is Whitchurch (Shropshire) station, roughly 2 miles north-west of the centre. Other landmarks nearby include Whitchurch Community Hospital (2.4 miles north-west) and Whitchurch Heritage Centre (2.4 miles north-west). Open spaces near Ash Parva include Prees Heath Common and Fenns Bank Works Pool 2.
Do you need bath re-enamelling in Ash Parva?
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.
Customers usually contact us about:
- Worn patches where water runs and sits
- A coloured bath you want in white
- A dull, rough surface that will not come clean
- A roll-top that’s seen better days
Questions to ask before booking
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
- How the colour is matched
- What happens if they find more damage
Questions from Ash Parva
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
How to look after the repair
After the repair has cured, a few habits help it last:
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Landlords, agents and businesses in Ash Parva
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
