Warwickshire · England
Bath Re-enamelling for Ashorne homes
Full bath re-enamelling and resurfacing in Ashorne, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
Bath re-enamelling at your home in Ashorne
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for brown or grey marks that don’t clean off and a roll-top that’s seen better days, on pressed steel baths, basins & shower trays and cast iron baths.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Ashorne (CV35)
- Region
- Warwickshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
How to get a price
Email us a picture of the damage and one of the whole item, and tell us you’re in Ashorne, and we will reply with a fixed quote.
Read more
Aftercare tips
Simple care helps the repair last. Our advice:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Common questions in Ashorne
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Landlord and trade work in Ashorne
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price depends on:
- How many areas need work
- Access to the area
- The material and finish
- Any earlier repairs that need removing first
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- A wider photo showing the entire bath
- Any earlier repairs or coatings
- The material, if you know it
- A coin or ruler next to the damage for scale
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
When we’d advise against a repair
In fairness, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
When to call us in Ashorne
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The most common problems we’re called about are:
- Wear marks under the taps
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- Lots of chips and rust spots
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- Aftercare advice
- What happens if they find more damage
- If travel is included in the price
Repair or replace in Ashorne?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Nothing taken out or refitted
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
See our full price list and resurfacing vs replacement cost guide.
Nearby places to Ashorne
What else we do in Ashorne
Covering Ashorne
Ashorne is about 5 miles south of Warwick, in Warwickshire. Our repair technicians come to homes and businesses in Ashorne and the surrounding area, so nothing has to leave your home. Ashorne is one of 324 towns and villages in Warwickshire we cover. Our nearest city page is Birmingham, about 23 miles away.
Every address in CV35 is covered. Neighbouring places we cover include Moreton Morrell (1 mile south), Bishop's Tachbrook (3 miles north), Whitnash (4 miles north), Warwick (5 miles north) and Sydenham (5 miles north). Larger places within reach include Stratford-upon-Avon (7 miles west), Leamington Spa (6 miles north), Kenilworth (9 miles north), Southam (7 miles north-east), Alcester (14 miles west) and Shipston-on-Stour (11 miles south).
Around Ashorne
Our customers here include homes close to Church of St George and Moreton Morrell CofE Primary School, among other places. Further afield, we also cover the area around Warwickshire Museum of Rural Life (0.9 miles south) and King John's Castle (4 miles south).
About our accreditations · Every repair comes with a one-year guarantee.
