Warwickshire · England
Bath re-enamelling & resurfacing in Moreton Morrell, Warwickshire
Bath re-enamelling in and around Moreton Morrell: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Bath re-enamelling in Moreton Morrell without replacing anything
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. Our technicians work on basins & shower trays, pressed steel baths and cast iron baths, and the jobs we see most are a peeling or bubbling previous coating and several chips and rust patches.
Every job is backed for twelve months in Moreton Morrell and everywhere else. If something goes wrong with the work, we come back.
- Where
- Moreton Morrell (CV35)
- Area hub
- Warwickshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
We agree an arrival time beforehand. On site, it takes most of the day in most cases. The room is left tidy and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Point us to the nearest place to park
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Related advice
Common problems we fix in Moreton Morrell
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Most people contact us when they notice one of these:
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
- Several chips and rust patches
- An old resurfacing that’s failing
Comparing quotes
- How soon you can use it again
- Who turns up on the day
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
Moreton Morrell and nearby
Moreton Morrell is about 6 miles south of Warwick, in Warwickshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Moreton Morrell is one of 324 places in Warwickshire we cover. Our jobs stretch from Moreton Morrell to Birmingham (24 miles away).
Postcode districts we cover here: CV35. Local streets include Oaktree Close, Middletown and Chestnut Grove, and we cover them all. Neighbouring places we cover include Ashorne (1 mile north), Bishop's Tachbrook (3 miles north), Whitnash (4 miles north), Warwick (6 miles north) and Sydenham (6 miles north). Larger places within reach include Stratford-upon-Avon (7 miles west), Leamington Spa (6 miles north), Kenilworth (10 miles north), Southam (8 miles north-east), Alcester (14 miles west) and Shipston-on-Stour (10 miles south).
Near you in Moreton Morrell
Typical jobs here are in homes near Church of the Holy Cross and Moreton Morrell CofE Primary School, among other places. Nearby you’ll also find Royal Leamington Spa Rehabilitation Hospital (4.6 miles north) and Warwickshire Museum of Rural Life (0.5 miles south-west).
Moreton Morrell: your questions answered
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
How do I get a price for bath re-enamelling in Moreton Morrell?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Are there extra charges for Moreton Morrell?
Travel is included in the price, and we charge the same wherever you are.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Also near Moreton Morrell
What else we do in Moreton Morrell
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why book with us
- Honest advice, even when it means no job
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- Generally one visit, start to finish
Take a look at our pricing and bath cost comparison.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Get any chip repaired quickly
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Holes rusted through the metal
- A bath split right through the body
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly.
What we work on
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
