Somerset · England
Bath re-enamelling & resurfacing in Asney, Somerset
Bath re-enamelling across Asney and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
About our bath re-enamelling in Asney
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Whether it’s an original cast iron bath that needs restoring and enamel that’s lost its shine and feels rough, we can help, on pressed steel baths, basins & shower trays and Victorian roll-tops alike.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Asney (BA16)
- Area hub
- Somerset
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Asney
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Get in touch if you’ve noticed:
- Wear marks under the taps
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
What to look for in a quote
- What happens if the damage is worse than the pictures show
- Who will actually do the work
- Whether they match the colour on site
- What prep work is covered
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Same prices wherever you are
- Nothing taken out or refitted
- Repair technicians who travel to you, UK-wide
- One visit for most repairs
Read our full price list or resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- What the surface is made of
- Doing more than one item at once
- The size and number of damaged areas
- The type of damage
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- The postcode, so we can plan the visit
- The material, if you know it
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What else we do in Asney
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Where we work around Asney
Asney is about 7 miles south-west of Wells, in Somerset. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Asney is one of 640 towns and villages in Somerset where we work.
Jobs in BA16 work the same way as everywhere else we cover. Neighbouring places we cover include Walton (1 mile south-west), Sharpham (1 mile north), Street (1 mile east), Berhill (1 mile west) and Northover (2 miles north-east). We also work in nearby towns such as Bridgwater (10 miles west), Yeovil (13 miles south), Burnham-on-Sea (12 miles north-west), Wells (7 miles north-east), Shepton Mallet (10 miles north-east) and Glastonbury (3 miles north-east).
Around Asney
Locally, our jobs take us to homes close to Royal Oak pub, Crispin School Academy and Walton Church of England Voluntary Controlled Primary School and the streets around them. Other landmarks nearby include Sedgemoor (1.6 miles west) and Shoemakers Museum (1 mile east). Green spaces nearby include Glastonbury Tor and Ham Wall.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Asney questions
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
What areas do you cover?
We work UK-wide, and that includes Asney. Prices do not change with location.
About our accreditations · Every repair comes with a one-year guarantee.
