Somerset · England
Bath re-enamelling & resurfacing in Walton, Somerset
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Walton. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- An old resurfacing that’s failing
Bath re-enamelling in Walton without replacing anything
Most baths are re-enamelled in a day, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s wear marks under the taps and stains that won’t shift, we can generally put it right.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Walton (BA16)
- County
- Somerset
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Walton
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- No need to remove anything
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
Take a look at our prices page or guide to resurfacing and replacement costs.
FAQs for Walton
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Are there extra charges for Walton?
No. Our quotes include travel, and we charge the same wherever you are.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Also in Walton
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Our work in Walton
Walton is about 8 miles south-west of Wells, in Somerset. Jobs in Walton are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Walton is one of 640 towns and villages in Somerset where we work.
Our visits in BA16 work the same way as everywhere else we cover. Whether you live on Main Street, Smallmoor Chase and Littlefield Close or anywhere nearby, we can come to you. If you are just outside Walton, we cover Asney (1 mile north-east), Sharpham (1 mile north), Berhill (1 mile west), Street (1 mile east) and Buscott (2 miles north-west). Within a short drive, we also cover Bridgwater (10 miles west), Yeovil (13 miles south-east), Burnham-on-Sea (12 miles north-west), Wells (8 miles north-east), Shepton Mallet (11 miles north-east) and Glastonbury (3 miles north-east).
What’s near Walton
We visit homes around Walton Church of England Voluntary Controlled Primary School, Crispin School Academy and Royal Oak pub. Further afield, we also cover the area around Sedgemoor (1.4 miles north-west) and Clarks Village (1.4 miles east). Not far away are Ham Wall and Glastonbury Tor.
What affects the price in Walton
Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Doing more than one item at once
- Unusual colours or finishes
- Any earlier repairs that need removing first
- Access to the area
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
You can take the pictures on your phone. Just ensure we can see:
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
If you are in Walton and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Common problems we fix in Walton
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Keep an eye out for these signs:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
What to look for in a quote
- Whether the price is fixed and includes VAT
- Who turns up on the day
- What happens if they find more damage
- What protection goes down before work starts
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
How to get a price
Send us a photo of the damage and a wider shot of the whole item, and tell us you’re in Walton, and we will reply with a fixed quote.
Read more
Aftercare tips
After the repair has cured, a few habits help it last:
- Avoid suction-cup mats
- Do not leave a chip unrepaired
- Don’t use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
