Somerset · England

Bath and surface repairs in BA16

Repairs and resurfacing across BA16, from Street, Walton and Asney. Free, fixed quotes from your photos and a one-year guarantee.

Need a repair in BA16?

Our bath repair service in BA16

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We work on cast iron enamel, acrylic and whirlpool & spa baths, and the jobs we see most are holes from dropped items and hairline or through cracks in acrylic.

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take a few hours, depending on the damage, and you are welcome to carry on with your day while we work.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the day after.

What it costs in BA16

Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor

  • Colour-matched on site
  • Free fixed quotes from pictures
  • Work done at your home or business
  • Dust sheets down, tidy finish

How to get a price

If you are in BA16 and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Landmarks near Street

In Street, that means homes near Hindhayes Infant School, The Lantokay pub and Crispin School Academy and the streets around them. Nearby you’ll also find Clarks Village (within half a mile north-east) and The Shoe Museum (less than half a mile north-east). Open spaces near Street include Ham Wall and Glastonbury Tor.

  • Parks and local facilities nearby include Sedgemoor (2.6 miles west)

What affects the price in BA16

Repairs from £95. We give every job a fixed price from pictures. These are the things that affect it:

  • How much damage there is
  • Any earlier repairs that need removing first
  • Unusual colours or finishes
  • The material

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what helps:

  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare
  • Where you are, by postcode
  • A clear, close picture of the problem area

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.

How to care for the repair

Good habits make a big difference to how long a repair lasts:

  • Store metal items away from the bath
  • Keep abrasive pads and gritty cleaners away from the bath
  • Rinse the bath after use, especially in hard water areas
  • Get a dripping tap fixed promptly

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.

Common problems we fix in BA16

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.

Send us a picture if you notice any of these:

  • Scratches you can feel with a fingernail
  • A failed DIY repair that’s discoloured or lifting
  • Damage done while the bathroom was being fitted
  • Chips on the rim or sides

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Rust that has eaten right through a steel bath

Common questions in BA16

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Will the price change on the day?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Will I be able to see the repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

Is my repair covered?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in BA16.

Do you cover the entire of Somerset?

Across the UK. Prices don’t change with location.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.