Cumbria · England
Bath re-enamelling & resurfacing in Aspatria, Cumbria
Fixed-price bath re-enamelling in Aspatria and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping

Questions from Aspatria
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your CA7 postcode.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Bath re-enamelling in Aspatria, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. If you are dealing with wear marks under the taps and stains that won’t shift, we can help, on cast iron baths, acrylic baths and pressed steel baths alike.
Big or small, it’s backed by a one-year guarantee.

- Location
- Aspatria (CA7)
- County
- Cumbria
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Aspatria
Frequently the bath has just had decades of use, and only the surface is worn. The body of the bath is usually perfectly sound.
The things customers usually mention when they call are:
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- Chips and rust in more than one place
Questions to ask before booking
- How to care for the finish
- How your room will be protected
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- What the surface is made of
- Access to the area
- What kind of damage it is
- Whether old repairs or coatings need taking off
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- Any details about the material
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
Ask for a price
Upload photos of the damage and a wider shot of the whole item, with your CA7 postcode, and we’ll reply with a fixed quote.
Related advice
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Covering Aspatria
Aspatria is about 13 miles north-east of Workington, in Cumbria. Jobs in Aspatria are booked in like any other job: a fixed price from your photos, then a visit to do the work. Aspatria is one of 438 places in Cumbria where we work. Our jobs stretch from Aspatria to Newcastle upon Tyne (about 69 miles away).
Every address in CA7 is covered. You’ll find streets such as Station Road, St Kentigerns Way and North Road. You will find Aspatria on the A596 and B5299, so it’s easy for us to reach. We also cover the places around Aspatria: Plumbland (2 miles south), Blennerhasset (2 miles east), Prospect (2 miles south-west), Bothel (3 miles south-east) and Gilcrux (3 miles south-west). Within a short drive, we also cover Workington (13 miles south-west), Maryport (8 miles south-west), Cockermouth (7 miles south), Keswick (14 miles south-east), Moorclose (13 miles south-west) and Wigton (8 miles north-east).
What’s near Aspatria
In Aspatria, that means homes near St. Kentigern's Church, Beacon Hill Community School and Aspatria Richmond Hill School and the streets around them. Aspatria has its own railway station: Aspatria station. Other landmarks nearby include Aspatria Castle (0.8 miles west). The countryside around Aspatria includes Caer Mote.
Nearby places to Aspatria
What else we do in Aspatria
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Don’t leave a chip unrepaired
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
If you manage property in Aspatria, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
When we’d advise against a repair
We will always be straight with you, so here’s what a repair will not do:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.

