Gloucestershire · England
Bath Re-enamelling for Aston Crews homes
We travel to Aston Crews for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Bath re-enamelling in Aston Crews without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include wear marks under the taps and a coloured bath you want in white, on cast iron baths, acrylic baths and pressed steel baths.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Aston Crews (GL17, HR9)
- Area hub
- Gloucestershire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Aston Crews
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Look out for any of the following:
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
Questions to ask before booking
- How long the guarantee is and what it covers
- If travel is included in the price
- Whether cleaning and preparation are in the price
- How long it needs to cure
Also near Aston Crews
More services for Aston Crews
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
Get a quote
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Our work in Aston Crews
Aston Crews is about 5 miles east of Ross-on-Wye, in Gloucestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Aston Crews is one of 470 towns and villages in Gloucestershire we cover. You can also see our page for Birmingham, about 46 miles away.
Every address in GL17 and HR9 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Clifford's Mesne (1 mile east), Little Gorsley (1 mile north), Beavan's Hill (2 miles north), Linton (2 miles north-west) and Gorsley Common (2 miles north). Within a short drive, we also cover Gloucester (11 miles east), Stroud (15 miles south-east), Tewkesbury (15 miles north-east), Brockworth (13 miles east), Quedgeley (10 miles south-east) and Lydney (12 miles south).
Near you in Aston Crews
In Aston Crews, that means homes near Church of St John the Baptist and the streets around them. Further afield, we also cover the area around Ross on Wye Hospital (5 miles west) and Aston Ingham (within half a mile north-east). Not far away are Wigpool and May Hill.
Looking after it afterwards
So the finish stays in good condition:
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Repairing versus replacing in Aston Crews
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why Aston Crews customers choose us
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
- One price list for the entire UK
- No need to remove anything
See our full price list or bath cost comparison.
Common questions in Aston Crews
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Are there extra charges for Aston Crews?
No. Our quotes include travel, and we charge the same wherever you are.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How long is the bath unusable?
Most baths are done in a day, ready the next day. We give you timings with the quote.
What happens after I send photos?
We review the pictures and send a fixed quote.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Honest limits
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Aston Crews. The price depends on:
- How many items we do on one visit
- The type of damage
- The colour and finish to match
- The material
A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
Upload pictures of the damage and one of the entire item, with your GL17 postcode, and we’ll come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
