Staffordshire · England
Bath re-enamelling & resurfacing in Aston, Staffordshire
Fixed-price bath re-enamelling in Aston and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Stains that will not shift
- A bath that stays dull however much you clean it
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Bath re-enamelling in Aston without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you are dealing with an old resurfacing that’s failing and a roll-top that’s seen better days, we can normally put it right, on Victorian roll-tops, basins & shower trays and acrylic baths alike.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Aston (ST18)
- Region
- Staffordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Aston
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About Aston
Aston is about 2 miles west of Stafford, in Staffordshire. Clients in Aston get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Our repair technicians cover 512 places in Staffordshire. We work right across the region, from Aston to Birmingham (about 26 miles away).
We cover every part of the ST18 postcode area and the streets around it. Other places close to Aston include Derrington (1 mile south), Doxey (1 mile east), Seighford (1 mile north-west), Creswell (1 mile north) and Coton Clanford (2 miles west). We also work in nearby towns such as Newcastle-under-Lyme (15 miles north), Cannock (10 miles south-east), Longton (12 miles north), Rugeley (10 miles east), Burntwood (13 miles south-east) and Stone (6 miles north).
Near you in Aston
Our customers here include homes close to St Matthew, King Edward VI High School and Doxey Primary and Nursery School, among other places. For rail, the closest station is Stafford station, roughly 1.7 miles east of the centre. Other landmarks nearby include Staffordshire Yeomanry Museum (1.9 miles east) and Stafford Castle (1 mile south-east). The countryside around Aston includes Doxey Marshes.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- One visit for most repairs
- Straight answers about what a repair can do
- A year’s guarantee on all work
- Nothing taken out or refitted
Take a look at our prices page or resurfacing vs replacement cost guide.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
- Have a window or extractor fan available
Ask for a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Towns and villages near Aston
More services for Aston
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Access to the area
- How many items we do on one visit
- Previous DIY repairs that have to come out
- How many areas need work
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed quote
We price nearly every job from pictures. This is what to send:
- Any earlier repairs or coatings
- The material, if you know it
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
To get a price, send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Staffordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
When to call us in Aston
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Signs it’s time to call us include:
- Brown or grey marks that don’t clean off
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
- Lots of chips and rust spots
Before you book anyone
- How changes to the job are handled
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- Who will actually do the work
Common questions in Aston
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do you cover Aston?
Yes, we do. We send a technician to Aston for every job, and the price is the same as everywhere else.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
How long does re-enamelling take?
Usually one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
