Staffordshire · England

Bath re-enamelling & resurfacing in Coton Clanford, Staffordshire

Our repair technicians come to Coton Clanford for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Coton Clanford

What a repair cannot fix

It helps to know what we can’t do:

  • A poorly supported acrylic bath, until it’s firmed up
  • Leaking taps or wastes (a plumber’s job)
  • A bath that is rusted through

If in doubt, send photos and we will say what we think before booking.

Materials we repair

  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths

Bath re-enamelling at your home in Coton Clanford

The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Our repair technicians work on acrylic baths, Victorian roll-tops and basins & shower trays, and people most often call us about a roll-top that’s seen better days and an outdated colour you’d like to change.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Where
Coton Clanford (ST18)
Region
Staffordshire
Guarantee
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Our work in Coton Clanford

Coton Clanford is about 3 miles west of Stafford, in Staffordshire. From the centre of Coton Clanford to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 512 towns and villages across Staffordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 26 miles away.

Every address in ST18 is covered. We also cover the places around Coton Clanford: Derrington (1 mile east), Aston (2 miles east), Seighford (2 miles north-east), Doxey (2 miles east) and Great Bridgeford (3 miles north). We also work in nearby towns such as Stafford (3 miles east), Newcastle-under-Lyme (15 miles north), Cannock (11 miles south-east), Longton (13 miles north), Rugeley (11 miles east) and Burntwood (14 miles south-east).

Near you in Coton Clanford

We visit homes around Church of All Saints. The nearest railway station is Stafford station, about 3.1 miles east. Other landmarks nearby include Stafford Castle (2.1 miles east) and Staffordshire Yeomanry Museum (3.4 miles east). The countryside around Coton Clanford includes Doxey Marshes.

Map of Coton Clanford © OpenStreetMap contributors

When to call us in Coton Clanford

Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.

These are the problems we’re asked about most:

  • Wear marks under the taps
  • An old resurfacing that is failing
  • A roll-top that is seen better days
  • Stains that will not shift

Questions to ask before you book

  • Who turns up on the day
  • How your room will be protected
  • How long it needs to cure
  • Aftercare advice

Choosing a repair company

Landlord and trade work in Coton Clanford

For anyone letting property in or around Coton Clanford, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Never use suction bath mats
  • A quick wipe after use keeps limescale away
  • Use washing-up liquid and a soft cloth
  • Get any chip repaired quickly

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Your questions about bath re-enamelling in Coton Clanford

What do you need from me?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

How do I get a price for bath re-enamelling in Coton Clanford?

Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote with dates.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so mention it when you send photos.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Can you make a coloured bath white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders across Staffordshire.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

What we do, step by step

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Open a window if you can
  • Ensure the area is dry
  • Keep pets and children out of the room while we work

Ask for a price

If you are in Coton Clanford and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Send pictures for a quote

Related advice

Should you replace it?

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Coton Clanford. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Coton Clanford

  • Free fixed quotes from pictures
  • Colours mixed by hand to suit your surface
  • Same prices wherever you are
  • Repair technicians who travel to you, UK-wide

Take a look at our full price list and bath cost comparison.

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.