Oxfordshire · England

Bath re-enamelling & resurfacing in Aston Upthorpe, Oxfordshire

Bath re-enamelling across Aston Upthorpe and nearby, done in a single visit in most cases.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Aston Upthorpe

About our bath re-enamelling in Aston Upthorpe

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Our repair technicians work on acrylic baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are lots of chips and rust spots and a bath in a colour that no longer suits.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Aston Upthorpe (OX11)
County
Oxfordshire
Warranty
12 months on all our work
Price
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

When we would advise against a repair

We will not take on work that will not last, so here’s what a repair cannot put right:

  • Anything hidden under an old coating, until we remove it
  • Leaks from fittings rather than the bath
  • A bath split right through the body

If in doubt, send photos and we will say what we think before you book.

Materials we work on in Aston Upthorpe

  • Pressed steel baths
  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths

What we are called out for in Aston Upthorpe

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Keep an eye out for any of the following:

  • Worn patches where water runs and sits
  • An old resurfacing that’s failing
  • Staining under the taps and around the waste
  • Enamel that is lost its shine and feels rough

What your quote should include

  • Whether the price covers travel
  • What happens if they find more damage
  • A fixed price, and whether VAT is included
  • Who turns up on the day

Choosing a repair company

What we do, step by step

We turn up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and the room is left clean and tidy.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Have a window or extractor fan available
  • Have somewhere for us to park nearby if possible
  • Mention any parking restrictions or tricky access

How to get a price

Most clients in Aston Upthorpe get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Related advice

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Aston Upthorpe questions

Do you cover the whole of Oxfordshire?

All of Oxfordshire, and the rest of the UK. Travel is included in the price.

Will the bath be moved?

No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.

What happens once I’ve sent pictures?

You get a fixed price and available dates. If we need another angle, we will ask.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside if you’d like.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before and we’ll plan for it.

What do you need from me?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

What does bath re-enamelling cost?

Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item with your OX11 postcode.

Are there extra charges for Aston Upthorpe?

No. Our quotes include travel, with the same prices everywhere we work.

About Aston Upthorpe

Aston Upthorpe is about 3 miles south-east of Didcot, in Oxfordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Aston Upthorpe is one of 443 places in Oxfordshire where we work. Our nearest city page is London, about 48 miles away.

Postcode districts we cover here: OX11. You will find streets such as Lower Ham Yard, Alisons Lane and Moreton Road, all of which we cover. Other places close to Aston Upthorpe include South Moreton (1 mile north), Cholsey (2 miles east), Moulsford (3 miles south-east), Winterbrook (3 miles east) and South Stoke (3 miles south-east). Further out, we also cover Oxford (12 miles north), Didcot (3 miles north-west), Abingdon-on-Thames (8 miles north-west), Thame (15 miles north-east), Wantage (10 miles west) and Henley-on-Thames (13 miles east).

Around Aston Upthorpe

In Aston Upthorpe, that means homes near South Moreton Primary School, Church of St Michael and The Chequers Inn Public House, among other places. For rail, the closest station is Cholsey station, roughly 1.8 miles east of the centre. Further afield, we also cover the area around Brightwell Castle (3.1 miles north-east). The countryside around Aston Upthorpe includes Churn Hill and Mowbray Fields.

Map of Aston Upthorpe © OpenStreetMap contributors

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • Use washing-up liquid and a soft cloth
  • Wash away dyes and oils after use
  • A dripping tap should be fixed promptly
  • Avoid suction-cup mats

Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Should I try a DIY kit first?

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Why repair rather than replace?

Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.

What you get with us

  • Colour mixed on the day to match
  • Everything repaired in place
  • Repair technicians who travel to you, UK-wide
  • Rooms protected and left tidy

Take a look at our pricing or guide to resurfacing and replacement costs.

How we price bath re-enamelling

Prices start from £350. Prices are worked out job by job. What matters most is:

  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • What the surface is made of

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Quotes from your pictures

It only takes a minute to photograph the damage. Try to send:

  • Where you are, by postcode
  • Details of any past repairs
  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare

To get a price, send two or three photos using our quote form or ring us. We will say right away whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.