Worcestershire · England
Bath re-enamelling & resurfacing in Atch Lench, Worcestershire
Bath re-enamelling in Atch Lench without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- A peeling or bubbling previous coating
Bath re-enamelling in Atch Lench, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include a peeling or bubbling previous coating and chips and rust in more than one place, on acrylic baths, pressed steel baths and cast iron baths.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Atch Lench (WR11)
- County
- Worcestershire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Atch Lench
Atch Lench is about 5 miles north of Evesham, in Worcestershire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Atch Lench is one of 376 towns and villages in Worcestershire we cover. Our nearest city page is Birmingham, about 22 miles away.
All of WR11 is within our area. Other places close to Atch Lench include Church Lench (1 mile north-west), Ab Lench (1 mile north-west), Rushford (1 mile east), Harvington (2 miles south-east) and Norton (2 miles south). Larger places within reach include Worcester (11 miles west), Redditch (10 miles north), Bromsgrove (13 miles north), Droitwich Spa (11 miles north-west), Evesham (5 miles south) and Pershore (6 miles south-west).
What’s near Atch Lench
Locally, our jobs take us to homes close to Church Lench CofE First School and Church of All Saints, among other places. The nearest railway station is Evesham station, roughly 4 miles south. A little further out are Inkberrow Castle (4.1 miles north). Open spaces near Atch Lench include Grafton Wood and Greenhill.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
FAQs for Atch Lench
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you come to Atch Lench?
Yes. We cover the whole UK and travel to Atch Lench and the rest of Worcestershire. Send pictures and we will quote, or call 0345 017 0787.
Can you repair something that’s been repaired before?
Typically, yes. The old repair comes out first, so let us know about it.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
How it works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the next day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Nothing taken out or refitted
- Colour-matched on site
- We’ll tell you if it’s not worth repairing
- Work done at your home or business
See our full price list and bath cost comparison.
Also near Atch Lench
Other services in Atch Lench
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- How much damage there is
- Whether old repairs or coatings need taking off
- The material
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- A picture taken from further back
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- Natural light rather than flash
Most clients in Atch Lench get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair will not do:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Keeping it looking good
Once the work has cured, treat it gently:
- Repair dripping taps early
- Keep suction mats out of the bath
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
