Worcestershire · England
Bath re-enamelling & resurfacing in Rushford, Worcestershire
Full bath re-enamelling and resurfacing at your home in Rushford, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
Bath re-enamelling in Rushford without replacing anything
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with worn patches where water runs and sits and brown or grey marks that don’t clean off, we can generally put it right, on cast iron baths, Victorian roll-tops and pressed steel baths alike.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Location
- Rushford (WR11)
- County
- Worcestershire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Have a window or extractor fan available
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Read more
Also near Rushford
Other services in Rushford
Landlords, agents and businesses in Rushford
We carry out planned and one-off repairs for housing associations and facilities teams in Worcestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Don’t leave a chip unrepaired
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
- Don’t leave bottles, razors or sponges standing on the surface
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- How much damage there is
- The material and finish
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your photos
Before you send pictures, these tips help us give you a firm price:
- What it’s made of, if you know
- A picture taken from further back
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Rushford, and we’ll reply with a fixed quote.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Do you need bath re-enamelling in Rushford?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Contact us if you’ve noticed:
- Staining under the taps and around the waste
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
What to look for in a quote
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- Who will actually do the work
- How to care for the finish
Repair or replace in Rushford?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- A year’s guarantee on all work
- Technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- Colour-matched on site
Read our full price list or resurfacing vs replacement cost guide.
Common questions in Rushford
Do you cover the whole of Worcestershire?
Everywhere in the UK, Rushford included. There’s no extra charge for travel.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
Our work in Rushford
Rushford is about 5 miles north of Evesham, in Worcestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Rushford is one of 376 towns and villages in Worcestershire we cover. Our nearest city page is Birmingham, about 21 miles away.
Jobs in WR11 work the same way as everywhere else we cover. Main roads around Rushford include the B4088, which makes travel easy. Other places close to Rushford include Atch Lench (1 mile west), Harvington (2 miles south), Church Lench (2 miles west), Weethley Bank (2 miles north) and Norton (3 miles south). Within a short drive, we also cover Worcester (13 miles west), Redditch (10 miles north), Bromsgrove (13 miles north-west), Droitwich Spa (12 miles north-west), Evesham (5 miles south) and Pershore (7 miles south-west).
Near you in Rushford
Locally, our jobs take us to homes close to Salford Priors CofE Academy and the streets around them. Rushford’s nearest station is Evesham station, about 4.5 miles south of the centre. A little further out are Inkberrow Castle (4.3 miles north-west). Open spaces near Rushford include Greenhill and River Arrow Nature Reserve.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
