Worcestershire · England
Bath Re-enamelling in Church Lench
Fixed-price bath re-enamelling in Church Lench and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price is based on:
- How much damage there is
- The colour and finish to match
- Any earlier repairs that need removing first
- Whether we combine several jobs
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- A picture taken from further back
- What it’s made of, if you know
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Bath re-enamelling at your home in Church Lench
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Our repair technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and common reasons people get in touch are several chips and rust patches and a coating lifting around the plughole.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Church Lench (WR11)
- County
- Worcestershire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Church Lench
Church Lench is about 5 miles north of Evesham, in Worcestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Church Lench is one of 376 places in Worcestershire where we work. You can also see our page for Birmingham, about 22 miles away.
Our repair technicians cover all of WR11 and the streets around it. You’ll find streets such as Main Street, Atch Lench Road and The Croft, all of which we cover. Nearby, we also work in Atch Lench (1 mile south-east), Ab Lench (1 mile west), Rous Lench (2 miles north-west), Rushford (2 miles east) and Harvington (2 miles south-east). Larger places within reach include Worcester (11 miles west), Redditch (10 miles north), Bromsgrove (13 miles north), Great Malvern (15 miles west), Droitwich Spa (11 miles north-west) and Evesham (5 miles south).
Near you in Church Lench
Locally, our jobs take us to homes close to Church Lench CofE First School and Church of All Saints, among other places. The nearest railway station is Evesham station, about 4.2 miles south of the centre. Further afield, we also cover the area around Inkberrow Castle (3.8 miles north). The countryside around Church Lench includes Grafton Wood and Greenhill.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Church Lench: your questions answered
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you cover the entire of Worcestershire?
All of Worcestershire, and the rest of the UK. Travel is included in the price.
Can you price it without visiting?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The process
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and how to care for it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the following day.
How to prepare
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
- Point us to the nearest place to park
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
Nearby places to Church Lench
What else we do in Church Lench
What we can’t put right
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think before you book.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
When to call us in Church Lench
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
- Stains that won’t shift
Questions to ask before booking
- How changes to the job are handled
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- Whether the colour is mixed to match
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, with the bath back in use the next day. Prices start from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
Why choose Surface Doctor in Church Lench
- No need to remove anything
- Generally one visit, start to finish
- Repair technicians who travel to you, UK-wide
- A fixed quote before booking
Take a look at our pricing and resurfacing vs replacement cost guide.
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
