South Gloucestershire · England
Bath Re-enamelling in Aust
Our repair technicians come to Aust for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Several chips and rust patches
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Let us know which floor the room is on
Getting a price
Send us pictures of the damage and a wider shot of the whole item, with your BS35 postcode, and we’ll come back with a fixed quote.
Read more
Bath re-enamelling in Aust without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. Whether it’s worn patches where water runs and sits and enamel that’s lost its shine and feels rough, we can help.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Aust (BS35)
- Area hub
- South Gloucestershire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Aust
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Most people contact us when they notice something like this:
- An outdated colour you’d like to change
- Wear marks under the taps
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Before booking anyone
- Who will actually do the work
- How soon you can use it again
- Whether cleaning and preparation are in the price
- What the guarantee covers, and for how long
Aust and nearby
Aust is about 4 miles south-east of Chepstow, in South Gloucestershire. We travel to homes and businesses in Aust and the surrounding area, so nothing has to leave your home. Aust is one of 110 places in South Gloucestershire we cover. Our nearest city page is Birmingham, about 68 miles away.
Postcode districts we cover here: BS35. We regularly work on streets such as Sandy Lane and The Row. Neighbouring places we cover include Old Passage (1 mile west), Northwick (2 miles south-west), New Passage (3 miles south-west), Redwick (3 miles south-west) and Pilning (3 miles south-west). Within a short drive, we also cover Kingswood (11 miles south-east), Mangotsfield (9 miles south-east), Yate (9 miles south-east), Fishponds (9 miles south-east), Bradley Stoke (5 miles south-east) and Thornbury (4 miles east).
Around Aust
In Aust, that means homes near The Boar's Head pub and St John's Church, among other places. The nearest railway station is Pilning station, about 3 miles south. Well-known places in the area include Thornbury and District Museum (3.9 miles east) and Chepstow Community Hospital (4.1 miles north-west). Open spaces near Aust include Red Hill.
Landlords, agents and businesses in Aust
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Aust, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What else we do in Aust
What a repair cannot fix
A repair is not right for every job, for example:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why book with us
- A year’s guarantee on all work
- Same prices wherever you are
- Technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
See our full price list or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- How much damage there is
- How hard the colour is to match
- How easy the damage is to reach
- The material and finish
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Send photos for a quote
Phone pictures are fine. Just ensure we can see:
- Where you are, by postcode
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Something in shot to show the size
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
FAQs for Aust
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What areas do you cover?
The entire UK, including all of South Gloucestershire. Send your postcode with your photos and we’ll confirm dates.
Are there extra charges for Aust?
We don’t add a call-out fee. Your fixed price includes everything.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How much does bath re-enamelling cost in Aust?
Prices start from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
About our accreditations · Every repair comes with a one-year guarantee.
