Wiltshire · England
Bath re-enamelling & resurfacing in Avebury, Wiltshire
Bath re-enamelling for Avebury, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
Bath re-enamelling in Avebury without replacing anything
We don’t move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. We’re often asked to fix a period or roll-top bath worth keeping and several chips and rust patches, on pressed steel baths, Victorian roll-tops and acrylic baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Area
- Avebury (SN8)
- County
- Wiltshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t use the bath until it has fully cured
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Do you need bath re-enamelling in Avebury?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Customers usually contact us about:
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
Comparing quotes
- Whether cleaning and preparation are in the price
- How your room will be protected
- Whether the price covers travel
- Aftercare advice
Nearby places to Avebury
What else we do in Avebury
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Covering Avebury
Avebury is about 6 miles east of Calne, in Wiltshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 425 towns and villages in Wiltshire. You can also see our page for Birmingham, about 72 miles away.
Our visits in SN8 are booked in the same way as anywhere else. Local streets include High Street, Beckhampton Road and Herepath Or Green Street, all of which we cover. We also cover the places around Avebury: Avebury Trusloe (1 mile south-west), Beckhampton (1 mile south-west), Winterbourne Monkton (1 mile north), East Kennett (2 miles south-east) and West Overton (2 miles south-east). Further out, we also cover Chippenham (12 miles west), Calne (6 miles west), Devizes (8 miles south-west), Melksham (12 miles west), Corsham (15 miles west) and Marlborough (6 miles east).
Landmarks near Avebury
Typical jobs here are in homes near Church of St James, among other places. Other landmarks nearby include Museum of Wiltshire Rural Life (within half a mile west). Not far away are Waden Hill.
Avebury questions
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
How long does re-enamelling take?
Most baths are done in a day, ready the day after. We’ll confirm timings when we quote.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
How much does bath re-enamelling cost in Avebury?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item with your SN8 postcode.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take the best part of a day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
- Open a window if you can
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Related advice
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- What the surface is made of
Our prices are the same across the UK, so there is no premium for Avebury. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- The material, if you know it
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Most clients in Avebury get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Avebury
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
