Wiltshire · England

Bath Re-enamelling for East Kennett homes

Local bath re-enamelling for East Kennett: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in East Kennett?

Landlord and trade work in East Kennett

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

For anyone letting property in or around East Kennett, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.

How we handle bath re-enamelling in East Kennett

We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the following day. We regularly repair acrylic baths, cast iron baths and basins & shower trays, and the jobs we see most are enamel that’s lost its shine and feels rough and lots of chips and rust spots.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Technician in a mask working on a freestanding roll-top bath
Where
East Kennett (SN8)
Region
Wiltshire
Cover
One year on every repair
Quotes
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

What happens on the day

Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for the best part of a day. Before we go, we will explain how long to leave it and how to look after it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

How to prepare

  • Let us know about parking or access
  • Mention any earlier repairs or resurfacing
  • Make sure the area is dry

How to get a price

The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Send pictures for a quote

Read more

Honest limits

To be straight with you, there are a few things a repair won’t fix:

  • Leaks from fittings rather than the bath
  • A bath split right through the body
  • Steel that has corroded right through

Send us photos and we will tell you honestly.

Materials we repair

  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths

What bath re-enamelling costs

Prices start from £350. Every quote is fixed and free. What we take into account:

  • The type of damage
  • How hard the colour is to match
  • Doing more than one item at once
  • How easy the damage is to reach

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Quotes from your pictures

Most quotes are done from pictures alone. To help us price it:

  • A coin or ruler next to the damage for scale
  • Any details about the material
  • Whether it’s been repaired or coated before
  • One picture of the entire bath

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Keeping it looking good

Once the work has cured, treat it gently:

  • Never use suction bath mats
  • Dry the bath after use to stop limescale
  • Wash away dyes and oils after use
  • Do not leave a chip unrepaired

Dry the bath after use if possible, and rinse off any bath products.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Common questions in East Kennett

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Can you do the outside of a roll-top?

Yes, often. The inside is resurfaced, and we can refinish the outside as well.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Can I get a quote without a visit?

Normally, yes. A close-up and a wider photo are enough to give a fixed quote.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How long is the bath unusable?

Most baths are done in a day, ready the day after. We will confirm timings when we quote.

How do I get a price for bath re-enamelling in East Kennett?

Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Our work in East Kennett

East Kennett is about 8 miles north-east of Devizes, in Wiltshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover 425 places in Wiltshire, from the larger towns to small villages. Our jobs stretch from East Kennett to Birmingham (about 74 miles away).

Our technicians cover all of the SN8 postcode area. We also cover the places around East Kennett: West Overton (1 mile east), Avebury (2 miles north-west), Avebury Trusloe (2 miles north-west), Beckhampton (2 miles north-west) and Winterbourne Monkton (3 miles north-west). Within a short drive, we also cover Chippenham (13 miles west), Calne (8 miles west), Devizes (8 miles south-west), Melksham (13 miles west), Marlborough (5 miles east) and Hardenhuish (14 miles west).

Local landmarks in East Kennett

Around East Kennett, we work in homes near Christ Church. Nearby you will also find Museum of Wiltshire Rural Life (1.9 miles north-west) and Savernake Hospital (5.5 miles east). Not far away are Overton Hill.

Map of East Kennett © OpenStreetMap contributors

Why repair rather than replace?

If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Free fixed quotes from pictures
  • Every repair guaranteed for a year
  • Most jobs done in one visit
  • Colour mixed on the day to match

See our pricing and guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.