Highland · Scotland
Bath Re-enamelling for Aviemore homes
We travel to Aviemore for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Stains that won’t shift
- Thin, worn enamel in places
Bath re-enamelling in Aviemore without replacing anything
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on basins & shower trays, cast iron baths and Victorian roll-tops, and the jobs we see most are several chips and rust patches and a bath in a colour that no longer suits.
Whatever the size of the job, it’s backed by a one-year guarantee in Aviemore and across Highland.
- Location
- Aviemore (PH22)
- County
- Highland
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Don’t let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before you book. We look at:
- Access to the area
- Whether we combine several jobs
- Unusual colours or finishes
- What the surface is made of
The price reflects the work involved, not where you live. The full price is agreed before booking.
How to get a fixed price
Two or three clear photos are generally enough. It helps if you send:
- Any details about the material
- Natural light rather than flash
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
If you’re in Aviemore and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Landlord and trade work in Aviemore
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Your questions about bath re-enamelling in Aviemore
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
The process
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Have a window or extractor fan available
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Advice
Aviemore and the surrounding area
Aviemore is about 24 miles south-east of Inverness, in Highland. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 253 towns and villages in Highland, from the larger towns to small villages.
Here we cover the PH22 postcode area. Streets in the area include Burnside Avenue, Craigellachie Crescent and Burnside Road, all of which we cover. Aviemore is on the A9 and B970, so it’s easy for us to reach. We also cover the places around Aviemore: Badenoch (1 mile south), Coylumbridge (2 miles south-east), Boat of Garten (4 miles north-east), Carrbridge (6 miles north) and Kincraig (6 miles south-west). Further out, we also cover Grantown-on-Spey (12 miles north-east), Kingussie (12 miles south-west) and Newtonmore (15 miles south-west). For island and remote addresses, call first so we can plan the visit.
What’s near Aviemore
In Aviemore, that means homes near Aviemore, among other places. For rail, the closest station is Aviemore station, roughly 0.8 miles south. Further afield, we also cover the area around Loch an Eilein Castle (3.5 miles south). Not far away are Loch Pityoulish.
Do you need bath re-enamelling in Aviemore?
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The things clients typically mention when they call are:
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
- A coloured bath you want in white
Before you book anyone
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- What preparation is included
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Towns and villages near Aviemore
More services for Aviemore
What a repair cannot fix
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
Send us pictures and we will tell you honestly.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
