Norfolk · England
Bath re-enamelling & resurfacing in Burgh next Aylsham, Norfolk
Bath re-enamelling in Burgh next Aylsham without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
What happens on the day
We turn up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Let us know which floor the room is on
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
How we handle bath re-enamelling in Burgh next Aylsham
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Whether it’s a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, we can normally put it right.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Burgh next Aylsham (NR11)
- Area hub
- Norfolk
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Burgh next Aylsham
More services for Burgh next Aylsham
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Rinse off hair dye, oils and bath bombs right away
- Respect the curing time we give you
- Do not leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Burgh next Aylsham questions
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do you cover Burgh next Aylsham?
We do. Repair technicians travel to Burgh next Aylsham from across the region, and the price is the same as everywhere else.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and usually a day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Burgh next Aylsham customers choose us
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- Typically one visit, start to finish
Take a look at our full price list and guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Our work in Burgh next Aylsham
Burgh next Aylsham is about 5 miles south-west of North Walsham, in Norfolk. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 797 places across Norfolk.
Jobs in NR11 are booked in the same way as anywhere else. That includes homes on The Street, Church Lane and Wood Lane and the roads around them. We also travel to Brampton (1 mile south-east), Tuttington (1 mile north), Marsham (2 miles south-west), Aylsham (2 miles north-west) and Little London (2 miles west). Within a short drive, we also cover Norwich (10 miles south), Sprowston (9 miles south), Thorpe St Andrew (10 miles south), North Walsham (5 miles north-east), Sheringham (12 miles north) and Norwich Lanes (10 miles south).
Landmarks near Burgh next Aylsham
In Burgh next Aylsham, that means homes near Aylsham High School and Church of St Mary the Virgin. Burgh next Aylsham’s nearest station is North Walsham station, roughly 4.8 miles north-east of the centre. Nearby you will also find Hautbois Castle (4 miles south-east).
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
Honest limits
Before you book, it’s worth knowing the limits:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Burgh next Aylsham. What changes the price is:
- Access to the area
- How many areas need work
- Whether we combine several jobs
- Unusual colours or finishes
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Before you send photos, these tips help us give you a firm price:
- A wider photo showing the entire bath
- Natural light rather than flash
- A coin beside the damage so we can judge size
- What it’s made of, if you know
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
