Norfolk · England
Bath Re-enamelling in Marsham
Full bath re-enamelling and resurfacing at your home in Marsham, with a one-year guarantee on every repair.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- A year’s guarantee on all work
- No extra charge for your area
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
See our full price list or guide to resurfacing and replacement costs.
Bath re-enamelling in Marsham, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you are dealing with chips and rust in more than one place and an outdated colour you’d like to change, we can typically put it right, on pressed steel baths, Victorian roll-tops and acrylic baths alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Marsham (NR10)
- Area hub
- Norfolk
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to the best part of a day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
Get a quote
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Your questions about bath re-enamelling in Marsham
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Signs you need bath re-enamelling in Marsham
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- Thin, worn enamel in places
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
Questions to ask before booking
- What prep work is covered
- How to care for the finish
- The length of the guarantee and what it covers
- How the colour is matched
How to look after the repair
After the repair has cured, a few habits help it last:
- Wash away dyes and oils after use
- Do not leave a chip unrepaired
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Towns and villages near Marsham
Other services in Marsham
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- Unusual colours or finishes
- How much damage there is
- How many items we do on one visit
- What kind of damage it is
The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- Any details about the material
- One picture of the entire bath
- Something in shot to show the size
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
About Marsham
Marsham is about 7 miles south-west of North Walsham, in Norfolk. Whether you’re in the middle of Marsham or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Marsham is one of 797 places in Norfolk we cover.
Our repair technicians cover all of NR10 and the streets around it. Local streets include High Street, George Edwards Close and Wathen Way. If you’re just outside Marsham, we cover Little London (1 mile west), Aylsham (2 miles north), Burgh next Aylsham (2 miles north-east), Brampton (2 miles east) and Hevingham (2 miles south). We also work in nearby towns such as Norwich (9 miles south), Dereham (14 miles south-west), Wymondham (15 miles south), Sprowston (8 miles south), Thorpe St Andrew (10 miles south) and North Walsham (7 miles north-east).
What’s near Marsham
Locally, our jobs take us to homes close to Marsham Primary School, Church of All Saints and Aylsham High School. Nearby you will also find Burgh next Aylsham (1.7 miles north-east).
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What a repair can’t fix
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A bath split right through the body
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Marsham
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
