Aberdeenshire · Scotland
Bath re-enamelling & resurfacing in Backburn, Aberdeenshire
Full bath re-enamelling and resurfacing for homes and businesses in Backburn and across Aberdeenshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it

Bath re-enamelling in Backburn without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with enamel that’s lost its shine and feels rough and a coloured bath you want in white, we can typically put it right, whatever the material.
Your repair is guaranteed for a year, as with every job we do.

- Where
- Backburn (AB54)
- Region
- Aberdeenshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Backburn
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Contact us if you’ve noticed any of these:
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
- Worn patches where water runs and sits
- An outdated colour you’d like to change
What to look for in a quote
- How to care for the finish
- Whether there are any call-out or travel charges
- Who turns up on the day
- What the guarantee covers, and for how long
Repair or replace in Backburn?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
What you get with us
- Dust sheets down, tidy finish
- Everything repaired in place
- One visit for most repairs
- Straight answers about what a repair can do
Read our prices page or resurfacing vs replacement cost guide.
Other services in Backburn
Questions from Backburn
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Aftercare tips
Once the work has cured, treat it gently:
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Use washing-up liquid and a soft cloth
- Don’t let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
When a repair is not the answer
Before you book, it’s worth knowing the limits too:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
Send us pictures and we will tell you honestly before booking.
Materials we work on in Backburn
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow the best part of a day from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Let us know which floor the room is on
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Related advice
Backburn and the surrounding area
Backburn is about 16 miles north-west of Inverurie, in Aberdeenshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 161 places in Aberdeenshire, from the larger towns to small villages.
Our technicians cover all of the AB54 postcode area. Other places close to Backburn include Bridgend (1 mile north-west), Gartly (1 mile south-west), Kennethmont (3 miles south), Huntly (4 miles north) and Rhynie (5 miles south-west). Larger places within reach include Turriff (15 miles north-east), Alford (12 miles south), Insch (7 miles south-east) and Aberchirder (13 miles north-east). Some remote addresses need extra planning, so call us to arrange it.
What’s near Backburn
Locally, our jobs take us to homes close to St Andrew's Parish Church and the streets around them. For rail, the closest station is Huntly station, roughly 3.3 miles north of the centre. Other landmarks nearby include Adamston Agricultural Museum (2.9 miles north-east) and Huntly Castle (4 miles north). Green spaces nearby include Kye Hill.
Landlords, agents and businesses in Backburn
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs in Aberdeenshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.

