Shropshire · England
Bath re-enamelling & resurfacing in Bagley, Shropshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Bagley. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
Bath re-enamelling in Bagley, done in place
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. We regularly repair pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people get in touch are chips and rust in more than one place and thin, worn enamel in places.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Bagley (SY1, SY3, SY2)
- Area hub
- Shropshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
When to call us in Bagley
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted:
- Chips and rust in more than one place
- A coloured bath you want in white
- Wear marks under the taps
- Brown or grey marks that don’t clean off
What your quote should include
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- Who will actually do the work
- What aftercare is recommended
FAQs for Bagley
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Getting a price
If you’re in Bagley and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Do not leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
- Wash away dyes and oils after use
- Don’t leave a chip unrepaired
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Bagley
- Colours mixed by hand to suit your surface
- Repair technicians who travel to you, UK-wide
- We leave the room as we found it
- Straight answers about what a repair can do
See our full price list or bath cost comparison.
What we can’t put right
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Landlords, agents and businesses in Bagley
For anyone letting property in or around Bagley, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Towns and villages near Bagley
Other services in Bagley
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Any earlier repairs that need removing first
- The type of damage
- Whether we combine several jobs
- How much damage there is
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed quote
Two or three clear pictures are usually enough. Try to include:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- Whether it’s been repaired or coated before
- The material, if you know it
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Bagley and the surrounding area
Bagley is about 1 mile north of Shrewsbury, in Shropshire. Jobs in Bagley are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Bagley is one of 433 places in Shropshire we cover. Our nearest city page is Birmingham, about 40 miles away.
Every address in SY1, SY3 and SY2 is covered. That includes homes on Sultan Road, Tarvin Road and Nettles Lane and the roads around them. Close by, we cover Coton Hill (1 mile west), Shrewsbury (1 mile south), Frankwell (1 mile south-west), Underdale (1 mile east) and Kingsland (1 mile south). Larger places within reach include Madeley (14 miles south-east), Wem (10 miles north), Broseley (13 miles south-east), Ellesmere (15 miles north-west), Church Stretton (13 miles south) and Bayston Hill (3 miles south).
Landmarks near Bagley
We visit homes around Wakeman School, The Royal Oak Public House and Shrewsbury High School. Nearby too are Church of St Michael (less than half a mile north-east) and Greenfields Primary School (within half a mile north). There’s a railway station in Bagley itself: Shrewsbury station. Other landmarks nearby include Shrewsbury Castle (under half a mile south) and Rowleys House Museum (0.6 miles south-west). Open spaces near Bagley include Haughmond Hill and Bomere Pool.
About our accreditations · Every repair comes with a one-year guarantee.
